nrussell

I need to know if anyone has the ATS intake horn WITH their Evil Twin CP3 kit? I put the cp3 motor mount bracket on and temporarily installed top cp3, and hardline interfere's with ATS intake horn enough that it will not work. Any suggestions??
Thanks

lmills

Most cast style aftermarket intake horns (ats, banks, afe, etc)will not work with the cummins pump kits, regardless of manufacturer. The reason is with the way the line comes out of the back of the pump, it is hard to make the turn away from it without having issues with making the turn too tight and compromising the strength of the line.

nrussell

can i remove the heater grid? can i bolt the ats intake horn directly to the intake plenum? if so i would be golden.

lmills

You would have to check to see if the intake horn is going to interfere with the number 1 injector line. The grid heater has a recess in it to allow clearance.

nrussell

it looks like i will have plenty of room if i removed heater grid. other than that, I would be good with removing heater grid? no ill effects?

lmills

no ill effects.

nrussell

Hey Lloyd
I sent you some pic's via email. would you check them out and let me know what you think?