reading Codes in Cab
#1
Registered User
Thread Starter
reading Codes in Cab
Does anyone know if the 1999 have the ability to get the OBDII codes in the cab? Or, do I need to buy one (yes I know I can get codes read at the parts store). Which readers are worth the money?
Thanks,
Bob
Thanks,
Bob
#4
Administrator
I've heard that most of the off-the-shelf readers don't always play well with our dual computer trucks
(PCM and ECM fighting with each other)
You could always get the Smarty, have a code reader made for our trucks, and a little kick in the pants to go along with it.
phox
(PCM and ECM fighting with each other)
You could always get the Smarty, have a code reader made for our trucks, and a little kick in the pants to go along with it.
phox
#6
Registered User
Join Date: Feb 2005
Location: Greensboro, NC
Posts: 193
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by phox_mulder
You'll need to get one, or keep frequenting the Auto Parts store.
Key on/off trick doesn't work on 98's or 99's.
phox
Key on/off trick doesn't work on 98's or 99's.
phox
#7
Registered
Join Date: Jul 2005
Location: Omaha, AR
Posts: 4,173
Likes: 0
Received 0 Likes
on
0 Posts
RenegadeT- it works on all the 24v 00, 01, and 02. and the sequence is on off on off on. then check the odometer and it will come up with the pcu (maybe pcm, or ecu, or ecm i forget) then it will say DONE. but wait a few seconds longer, the ecm will come up and read the codes on that. (again, not sure on the ecm part). then it will say DONE again. then your finished.
Trending Topics
#8
Registered
Join Date: Jul 2005
Location: Omaha, AR
Posts: 4,173
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by megamac
Thanks,
I'll check into the Smarty....
Obo
I'll check into the Smarty....
Obo
Thread
Thread Starter
Forum
Replies
Last Post
mullishacrew
1st Gen. Ram - All Topics
4
03-18-2012 12:41 PM
exwrestler
3rd Gen Engine and Drivetrain -> 2003-2007
5
02-05-2010 09:34 AM
sallyman1
3rd Gen High Performance and Accessories (5.9L Only)
4
08-26-2008 06:20 PM