deaner5566

i've got a 06 2500 5.9L cummins 4x4 with 99,000 on the clock now and for a while have been living with the "loose wobblie" feeling in the front suspension. i recently replaced the stock shocks and front steering stablizer which i will say were well worn! i also installed a steering box stabalizer. it helped but its still not right. i had the front end looked at and was told its ball joints and tie rod ends are time to be replaced as well. are there any companies that make "better" or better yet "bulletproof" replacement parts! i would hate to go through this every few years! 4 wheel proformance parts quoted me $1450 to do all the work: 4 ball joints, 4 tie rod ends, and an allignment. does that price sound preaty reasonable? or should i bite the bullet and do it myself? any comments would be greatly appreciated!!!!

Fisherguy

You'll get lotsa people tell you Carli BJ's are the only ones to get, but 4 of them will cost ya 1200 in parts.
There's also some new Dynatrack's out there for about half of that, and some new ones by XRF

There's been lotsa threads here on it lately, here's a few:
https://www.dieseltruckresource.com/...s-t251447.html

https://www.dieseltruckresource.com/...s-t154917.html

https://www.dieseltruckresource.com/...s-t251371.html

For the rest of the steering I'd go with the new 08.5 steering, there's lotsa threads on that too...

FLYH2O

Xrf

deaner5566

thanks for your replies! any and all info can only help my situation! thank you very much again!

J.Suplanski

You get what you pay for! Lots of luck if their not Carli.

Fisherguy

You work there or something?

RiverRat2

That's what I'm thinking?????? LOLOL!!!!!

rogers259

hard to tell on the lower Carli BJ's as they are not available late November according to the Carli website.

bob4x4

Stop picken on John no he doesn't work there he is retired.

One romp in the dez in my Carli equipped truck and he knew what he wanted on his.
He is so impressed with their products he likes to share

bob4x4

They are being tested real world Baja etc.now

Fisherguy

He must have a good pension then!

J.Suplanski

Got three pensions, and social security, 12,000 in Suspension 7,500 in the trans, and 15,000 in the engine 6,000 in paint and body work! How you doing?

justin mcfall

Now we know why he can make this statement on every suspension post.

D-Roc

Everyone's talkin' about BJ's....makin my head spin!!!!!!

Fisherguy

Just cuz you can afford to spend $30k to accessorize your truck doesn't mean everyone else can; doesn't mean everyone else wants or needs to for what they use it for.
Like most people I don't have an endless supply of funds to play with.