Quadzilla Display
06-22-2009, 08:53 PM
#1
Registered User
Thread Starter
Join Date: Nov 2003
Posts: 175
Likes: 0
Received 0 Likes
on
0 Posts
Quadzilla Display
Having a issue with my Quadzilla and the display inside the cab. The display will be just fine for two or three weeks, then suddenly go haywire; the numbers erratically jumping from PL01 to 9,8, 4,00...etc. If I take the module inside and dump the memory and reload the desired program, its good for another two or three weeks, then the same thing again. Its becoming more frequent. Today, the entire display blank for approximately one hour, then suddenly came back.
Anyone had issues such as this before? I've checked my wiring for nicks, cleaned and reseated the ground....at a loss.
Thanks
Anyone had issues such as this before? I've checked my wiring for nicks, cleaned and reseated the ground....at a loss.
Thanks
Thread
Thread Starter
Forum
Replies
Last Post
mopar440cu
Performance and Accessories 2nd gen only
2
11-21-2015 08:39 PM
norcaljr
3rd Gen High Performance and Accessories (5.9L Only)
13
08-05-2008 10:13 AM
Smokin98.5
Performance and Accessories 2nd gen only
0
05-29-2008 05:35 PM
budbon
3rd Gen Engine and Drivetrain -> 2003-2007
6
08-07-2007 08:34 PM