Quadzilla Adrenaline shutting off!!!
#1
Registered User
Thread Starter
Join Date: Dec 2006
Location: Cheyenne
Posts: 174
Likes: 0
Received 0 Likes
on
0 Posts
Quadzilla Adrenaline shutting off!!!
My truck will run good for about 10 minutes and then i have to turn the key off and on for it have anything above level 2 pump wire tapped good. box seems to shut off or something... anything that would help would be great....
#2
Registered User
Join Date: Dec 2007
Location: Port Ludlow/Ellensburg, Wa
Posts: 255
Likes: 0
Received 0 Likes
on
0 Posts
A lot of people are having the same problem, including me. I've been working with Jeremy for a while now and they've been trying to work out the problem. Justin called me today to give me an update because Jeremy had to go out of the office, but I'm going to talk to Jeremy or Quad tomorrow to get another update from the main guys. I'll let you know what I hear.
#3
Registered User
Thread Starter
Join Date: Dec 2006
Location: Cheyenne
Posts: 174
Likes: 0
Received 0 Likes
on
0 Posts
sounds good man i hope something will get figured out soon..... running half power would make me really ****** at the dyno next weekend.....I think it just started happening with these new tunes...
#4
Registered User
Join Date: Dec 2007
Location: Port Ludlow/Ellensburg, Wa
Posts: 255
Likes: 0
Received 0 Likes
on
0 Posts
I've found that if you start running the truck on PL 2 or below once you start the truck you can control when it kicks out, at least on my truck. I'll run around on PL 2 until I want to use something above that (like if I'm passing someone, and almost always 10), then drop it back down to 2 when I'm done. If they don't come up with a fix by then and you're driving your truck to the dyno then try that and see how it goes. Drive it there on 2 then kick it up to 10 when you're on the dyno. Actually, try driving it like that this week and see if that works. If all else fails, reset the Adrenaline when you get on the dyno and the power should be there. Hope this helps.
#5
Registered User
Join Date: Dec 2007
Location: Port Ludlow/Ellensburg, Wa
Posts: 255
Likes: 0
Received 0 Likes
on
0 Posts
I just got off the phone with Jeremy and it sounds like they're having one of their local guys coming in tomorrow that's having the same problem as us. He said that it looks like it's the pump stretch that they're having problems with because it keeps losing signal of some sort. They're going to work on the guy's truck tomorrow and he's going to give me a call tomorrow after they're done and give me an update. Hopefully it gets fixed!
#6
Registered User
Thread Starter
Join Date: Dec 2006
Location: Cheyenne
Posts: 174
Likes: 0
Received 0 Likes
on
0 Posts
yea i called today too. talked to Jeremy supposed to be fixed by the end of the week I'm hoping its fixed soon i tried different tunes today still the same thing....ill be waiting patiently...
#7
Registered User
Join Date: Dec 2003
Location: NE,Missouri
Posts: 733
Likes: 0
Received 0 Likes
on
0 Posts
I've been having the adr. loose it's tune which I believe is is what you guys are talking about. They called me the other day and had me send my pulse in. They were thinking it was causing the problems. You could unhook the adr. for a few minutes and it would work fine when you hooked it back up. I hope they figure it out, it's getting annoying.
Trending Topics
#11
Registered User
Join Date: Dec 2007
Location: Port Ludlow/Ellensburg, Wa
Posts: 255
Likes: 0
Received 0 Likes
on
0 Posts
It shut off DURING spool up? Are you sure you didn't lose it before you started to take off? If I begin to go into the throttle with it working, it will always work, but sometimes it will kick out after I'm out of the throttle. Luckily mine was working the other day while I was racing 3 girls in a Civic on I90!
#12
Registered User
Join Date: Jan 2006
Location: Weatherford TX.
Posts: 540
Likes: 0
Received 0 Likes
on
0 Posts
I just got off the phone with Jeremy and it sounds like they're having one of their local guys coming in tomorrow that's having the same problem as us. He said that it looks like it's the pump stretch that they're having problems with because it keeps losing signal of some sort. They're going to work on the guy's truck tomorrow and he's going to give me a call tomorrow after they're done and give me an update. Hopefully it gets fixed!
#14
Registered User
Join Date: Dec 2007
Location: Port Ludlow/Ellensburg, Wa
Posts: 255
Likes: 0
Received 0 Likes
on
0 Posts
#15
Registered User
Thread Starter
Join Date: Dec 2006
Location: Cheyenne
Posts: 174
Likes: 0
Received 0 Likes
on
0 Posts
i don't know when it shut off but when i spooled i had nothing STACKED get in there man i need to get this figured out soon!!! Dyno event is coming up