tcr

Well I was hoping for +/-500hp, but didn't get there. THe best runs were:

Smarty alone #9 was 407/775
Smarty#9/Quad Race 60hp= 458/872
Smarty#9/Quad Race 140hp= 454/907
Smarty#7/Quad Race 140hp= 447/918
Smarty#7/Quad Race 100hp= 451/912


Dynojet Dyno 77*/ Humidity74%/ 29.10in-Hg

I made many more runs, but only posted the best ones. Max boost was 42psi, I see 47-48 on the street. I dont understand how far off the hp/tq #s were w/ different settings. HP goes down, TQ goes up. I'm thinking injectors are probably holding me back, what do you guys think?

Duallydog

Impressive. I need to get more fuel going on my truck.

Green04HO

I found the same thing when I Dynoed my truck. I did 435/892 with the Smarty on 7 and Quad box on 60. The more I turned up the Quad box the more torque I made but the horsepower dropped off. I'm in the process of getting my hands on some Flux 2's now, so hopefully I will be over 500 and closer to 550.

rustyshakelford

whats the difference in your truck and member texasctd? i think he made like 466hp w/ the smarty on #9 only. if i remeber right, thats w/ a stock turbo and trans

brett

Green04HO

His truck is an 04.5 and he has better stock injectors than the 03-04 trucks. Not sure what other mods he might have.

MikeyB

tcr,
My guess is you're at the limits of the stock injectors and the CP3 pump.

I'll be happy to make 450hp!

MikeyB

35" 05'

That makes me happy with CL./xzt stack. 477 940 tq. I was wonderin if the standard would be better but im very happy with 65hp xzt

tcr

You guys w/ the 600s and 610s need to stay out of this, all you need is a Smarty and a stock truck and you'll have my #s. One thing I didn't do is use the WILD program, I used the Mod TM. How many extra ponies, if any are in the Wild?

rustyshakelford

no need to get nasty...lol, nice numbers though too. but i dont think the wild program does much more than fuel ALOT on the low end. someone correct me if im wrong

brett

tcr

Your right, the 60hp setting added alot to the Smarty, but going to the 100 and 140hp settings from the 60hp really made no difference. I'd say an xzt would have gotten me close or the same #s.

tcr

Oh I'm not. I'm just joking........................and jealous

Duallydog

TexasCTD, I think, only had a Walbro kit and maybe a drop in air filter.

C'ya

Got 464/1018 with TST and Edge EZ stack on stock turbo. Would've thought you could hit 500 with that HTB2 turbo? What gives-does the smarty not fuel as hard? Could tranny make a difference?

TexasCTD

We just installed the Walbro at our last DTR gtg earlier this month. My dyno run was back in February on the stock, filter housing mounted, fuel pump. It was pulling down pretty close to zero fuel pressure.

And my air supply is an AFE Stage 2 pg7.

Everything else was stock. Smarty Level 9, 466hp/922tq. on Dynojet. http://www.riegerweb.com/Nortex_DTR/...I/TexasCTD.WMV

Im gonna dyno again hopefully in April with the Walbro installed, but I doubt it will change my numbers any.

My guess is that the 04.5 on up trucks have different injectors and that accounts for the power difference. Im sure some Flux injectors would take care of that and then some for the 03-04 trucks though.

BossHogg

Good numbers, but I will have to say that I was planning on this stact too, and hoped to see you say 500+ easy! I bet you could put down more with a bit more in the trans.

Us 03-04 guys cant get a break! Now we have to buy injectors??