Quad EMI
#3
my quad would set a light and lose power when i originally had it mounted to the brake control module under the dash. i moved it as high up the dash that i could and no longer have had any problems.
#4
Registered User
Thread Starter
That's what I'm talking about; I'm wiring the rest of the bombs and would rather get the Quad harness installed trouble-free the first time, with the box located where it won't have any issues.
#6
Registered User
Thread Starter
Thanks Mike - would something low budget like grounded tin foil wrap inside the plastic flex conduit be fine? I really don't want to put the harness inside flex armor conduit! I have some SS and some Cu braided sleeve in the shop, but probably nothing long enough... besides, that stuff is $$$
#7
i just mounted my quad to the panel above your knees, just as high as i could get it, on the right side of the panel is a flat spot about the size of the quad when laid on its side, i just doubleback taped it there, and I can see the led when driving. never an issue after that.
Trending Topics
#8
Registered User
Thanks Mike - would something low budget like grounded tin foil wrap inside the plastic flex conduit be fine? I really don't want to put the harness inside flex armor conduit! I have some SS and some Cu braided sleeve in the shop, but probably nothing long enough... besides, that stuff is $$$
MikeyB
Thread
Thread Starter
Forum
Replies
Last Post
89dieselkong
3rd Generation Ram - Non Drivetrain - All Years
6
07-27-2010 10:55 AM
P.J
3rd Gen High Performance and Accessories (5.9L Only)
8
10-13-2006 01:54 PM
hllbllyhellion
3rd Gen High Performance and Accessories (5.9L Only)
2
08-19-2006 06:18 AM