Quad Cab Conversion
#1
Registered User
Thread Starter
Join Date: Jan 2005
Location: PASADENA (SE HOUSTON)
Posts: 66
Likes: 0
Received 0 Likes
on
0 Posts
Quad Cab Conversion
IM STARTING W/ MY 97 TD2500 REG CAB. I WOULD LIKE TO PUT A QUAD CAB SHORT BED ON THE TRUCK. FIRST CAN I SWAP ALL OF MY INTERIOR/ INSTRUMENTATION, ETC. TO THE QUAD CAB W/O ANY MAJOR PROBLEMS? HAS ANYONE DONE THIS? ANY MAJOR PITFALLS? PLEASE EDJUMACATE ME
#2
Registered User
Join Date: Nov 2006
Location: Claremont, NH
Posts: 844
Likes: 0
Received 0 Likes
on
0 Posts
I think you are nuts. Do you have a donor truck? Or are you going to buy these parts at the local salvage yard? Wouldn't it be cheaper to buy a quad cab truck?
#3
Banned
The 98.5 up have a completely different interior/dash than 98.5 down. I don't think it would bolt up without modification. You would also have to cut the bottom of the Quad cab & build a new floor because the frame steps up behind your cab. The body mounts would also need moved/rewelded. I would look for another truck, not worth the effort if you end up with a hacked up truck in the end.
#4
Registered User
Thread Starter
Join Date: Jan 2005
Location: PASADENA (SE HOUSTON)
Posts: 66
Likes: 0
Received 0 Likes
on
0 Posts
new info
well my truck has a salvage title(no loan or resale value) and i work at a junk yard- parts are not the problem and fitament of the cab and accessories inside the cab is not the problem- upon further research the wheel base of my truck is 134" the wheel base of a quad cab short bed is 139"- my conclusion(my problem unless anyone knows different) frame would have to be stretched or shortbed would have to be shortened to allow wheel to fit in properly- neither would i want to do. thanks for the replies hope everyone had a good holiday
Thread
Thread Starter
Forum
Replies
Last Post
Mayo
Performance and Accessories 2nd gen only
6
11-19-2010 07:26 PM
89dieselkong
3rd Generation Ram - Non Drivetrain - All Years
6
07-27-2010 10:55 AM
ataboy9026
3rd Gen Engine and Drivetrain -> 2003-2007
13
01-03-2010 02:08 AM