2nd Gen. Dodge Ram - No Drivetrain Discussion for all Dodge Rams from 1994 through 2002. Please, no engine or drivetrain discussion.

Pulling to the left

Thread Tools
 
Search this Thread
 
Old 01-16-2009, 05:50 PM
  #1  
Registered User
Thread Starter
 
dsl dave's Avatar
 
Join Date: Feb 2008
Location: Altamont
Posts: 27
Likes: 0
Received 0 Likes on 0 Posts
Pulling to the left

I took the dodge in to get a front end allignment today, the truck is pulling to the left when the steering wheel is centered. (You drive down the road with the wheel turned slightly to the right and let go the wheel returns to center and the truck pulls to the left.) During the allignment the mechanic put it on the machine and made sure everything was in spec, and gave me a print out of the readings that matched the oem settings, and he rotated the tires and drove it again, and that didnt help. So the truck still pulls towards the left. It is a definite pull to the left and not a wander. Any suggestions????
Old 01-16-2009, 06:45 PM
  #2  
Banned
 
Junk Man's Avatar
 
Join Date: Nov 2006
Posts: 1,031
Likes: 0
Received 0 Likes on 0 Posts
How long has it been doing this? Post the specs. More caster on 1 side will cause the truck to pull. I've had a radial pull in both front tires & swapping the wouldn't fix it. Shop blamed everything else. Also had a shop print 1 set of specs. I drove 800 mi with a terrible wander, put it on another machine & spesc were way different than 1st machine. Firestone has lifetime warranty for $140 out the dood & good as long as you own the truck.
Old 01-16-2009, 07:05 PM
  #3  
Registered User
Thread Starter
 
dsl dave's Avatar
 
Join Date: Feb 2008
Location: Altamont
Posts: 27
Likes: 0
Received 0 Likes on 0 Posts
The steering has always wandered, i took it to the dodge dealer and they told me i needed a new track bar, i put a new moog one on about 4 months ago and then it started pulling to the left. The mechanic noted today that the steering was tight for a ram truck.

Front Camber: L 0.1 deg. R 0.1 deg
Caster L 2.5 deg. R 2.9 deg
Toe L .04 deg. R .02 deg

Total toe .06 deg
Steer Ahead .01 deg

The place where i got it alligned will work with me to get it fixed, they just need some different ideas to try. My tires are worn and they had a set of 285/75R16 BF TA Ko's they could put on, they said if new tires didnt work they would let me return them and go back to my ones now. Should i try that, or do ya think, looking at the specs above, it is something else?
Old 01-16-2009, 07:45 PM
  #4  
Registered User
 
mr bill's Avatar
 
Join Date: Jul 2007
Location: Leander,Tx
Posts: 190
Likes: 0
Received 0 Likes on 0 Posts
Check out dodgeram.org and click on steering and alignment
Old 01-17-2009, 09:45 AM
  #5  
Registered User
 
high bid's Avatar
 
Join Date: May 2007
Location: Sarasota, FL
Posts: 2,158
Received 8 Likes on 8 Posts
Tires can definately make a diff in overall handling. I noticed a big diff going from the Goodyear MTRs to BFG AT. I would make sure to get things aligned prior to as you don't want to eat thru a set of BFGs and have to buy more. Some say the calipers can stick causing pull...you may want to check and make sure they retract freely when off the brakes.
Old 01-17-2009, 10:58 AM
  #6  
Registered User
 
dieselman2300's Avatar
 
Join Date: Aug 2007
Location: Beautiful USA!
Posts: 1,133
Likes: 0
Received 1 Like on 1 Post
You could have a caliper dragging on the rotor. Get an Infra-red temp. gun, Go for a drive and check both side. If one is hotter than the other on the side its pulling, that could also be your problem.
Old 01-17-2009, 10:10 PM
  #7  
Registered User
Thread Starter
 
dsl dave's Avatar
 
Join Date: Feb 2008
Location: Altamont
Posts: 27
Likes: 0
Received 0 Likes on 0 Posts
Yeah i didnt think of the brake calipers, ill check that out. I went ahead with the 285 bfg KO's today to try them out, They are really really nice, quiet, ride very well, and don't throw the rocks! They seemed to help out the pulling to the left, it still does it a little on some roads, but i think thats probably normal. The tire/alignment place said they had to align to the factory specs so that they do not void any warranties, but they said if the dodge dealer had any new up to date info the tire dealer would align it to those specs free of charge. Yeah, I dont need to be chewing through $$$ tires i have a $$$ college bill to chew on already!
Old 01-18-2009, 09:24 AM
  #8  
Registered User
 
dozer12216's Avatar
 
Join Date: Dec 2007
Location: North Carolina or Kentucky. Take your pick
Posts: 2,738
Received 0 Likes on 0 Posts
"BULL DURAM" on their void any warranties statement. Sounds like too innocent of alignment to figure and fix problems. In the "green" is not gonna fix some issues.

Last edited by dozer12216; 01-18-2009 at 09:28 AM. Reason: change language
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
cm979
24 Valve Engine and Drivetrain
21
03-17-2008 03:36 PM
97RamBeast
12 Valve Engine and Drivetrain
15
01-22-2008 09:37 PM
getblown5.9
2nd Gen. Dodge Ram - No Drivetrain
13
06-24-2007 06:42 AM
Blackhawk
2nd Gen. Dodge Ram - No Drivetrain
4
08-22-2006 08:39 PM
dezlsmkr
12 Valve Engine and Drivetrain
7
08-11-2006 02:43 AM



Quick Reply: Pulling to the left



All times are GMT -5. The time now is 06:42 AM.