Towing and Hauling / RV Discuss towing and hauling here. Share your tips and tricks. RV and camping discussion welcome.

Prodigy P3 took a crap

Old 01-20-2010, 12:12 AM
  #1  
Registered User
Thread Starter
 
pwknapp's Avatar
 
Join Date: Apr 2002
Location: Wyoming
Posts: 211
Likes: 0
Received 0 Likes on 0 Posts
Prodigy P3 took a crap

Anyone here have their P3 quit? Had it 2.5 yrs and only used it about a dozen times. Screen dark with a lit border and nothing will come up on it no matter what buttons I push.
Old 01-20-2010, 08:54 AM
  #2  
PCM
Registered User
 
PCM's Avatar
 
Join Date: Jul 2006
Location: St Augustine, FL
Posts: 313
Likes: 0
Received 0 Likes on 0 Posts
I have had mine for about 5 years and it has had lots of use. I have always heard lots of good about it, too. The only thing that I have heard of that will cause probable failure is pulling the trailer breakaway switch while the "umbilical cord" is plugged into the truck. I know not much help, but thought I'd pass that on. pcm
Old 01-20-2010, 09:38 AM
  #3  
Registered User
 
torquefan's Avatar
 
Join Date: Sep 2003
Location: Calgary, Alberta
Posts: 4,449
Received 44 Likes on 39 Posts
Not sure about the P3s, but the Prodigy has a lifetime warranty. Read up on its paperwork, or have a look on the website.
Old 01-20-2010, 10:17 AM
  #4  
Registered User
 
bishkoff's Avatar
 
Join Date: Mar 2009
Location: Utah
Posts: 23
Likes: 0
Received 0 Likes on 0 Posts
I know this sounds simple, but did you try unplugging it and letting it sit for a few minutes and then plugging it back in. It is my understanding that the P3 constantly draws from the battery. Could be worth a try.
Old 01-20-2010, 11:38 AM
  #5  
Registered User
Thread Starter
 
pwknapp's Avatar
 
Join Date: Apr 2002
Location: Wyoming
Posts: 211
Likes: 0
Received 0 Likes on 0 Posts
Thanks guys, I will try unplugging and restarting. I have one in my company truck and it works flawlessly. Will let you know. Thanks again. Paul
Old 01-20-2010, 07:29 PM
  #6  
Registered User
 
CrazyCooter's Avatar
 
Join Date: Jul 2006
Location: Redding, CA
Posts: 632
Likes: 0
Received 0 Likes on 0 Posts
Mine locked up last month. A reboot fixed her right up.

Things have have gotten way too complicated!
Old 01-21-2010, 10:48 AM
  #7  
Registered User
Thread Starter
 
pwknapp's Avatar
 
Join Date: Apr 2002
Location: Wyoming
Posts: 211
Likes: 0
Received 0 Likes on 0 Posts
Can't get the stinkin' plug off the back of the unit.
Old 01-21-2010, 02:29 PM
  #8  
Registered User
 
cLAYH's Avatar
 
Join Date: Aug 2003
Location: Cochrane Alberta
Posts: 2,021
Likes: 0
Received 7 Likes on 6 Posts
So unplug it at the other end where it goes into the truck harness......
Old 01-23-2010, 10:02 AM
  #9  
Registered User
 
MoparMarv's Avatar
 
Join Date: Dec 2005
Location: Oak Lawn, IL
Posts: 783
Likes: 0
Received 1 Like on 1 Post
I had the same thing happen. I bought a new one and went to go change it and was stopped half way thru the project so I replugged the old one and its worked fine ever since. I had no luck getting thru to tekonsha via email about help with troubleshooting and nothing online said to unplug the unit and replugg it for a frozen screen. I have been very pleased with it otherwise.
Old 01-26-2010, 11:40 AM
  #10  
Registered User
 
jlipskoc's Avatar
 
Join Date: Jun 2003
Location: California, MO
Posts: 396
Likes: 0
Received 0 Likes on 0 Posts
My P3 never dumped or quit, it was experiencing no proportional braking. The controller would go to full power when you hit the brakes. I called the factory with the warranty, they never wanted to admit it was a known problem etc, so had to pay shipping back, they gave me a another one, some other threads not on this site say a bad early batch were prone to lots of issues.

I've since put my Prodigy back and had no problems.

I like my Prodigy better anyways, prefer the dial to adjust braking, not the screen, its a pia to adjust via the buttons while on the road trying to find that sweet spot.
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
blacksmoker0268
1st Gen. Ram - All Topics
13
08-23-2007 07:53 AM
king5335
Performance and Accessories 2nd gen only
1
03-11-2007 02:22 PM
patrick
HELP!
4
03-11-2003 06:55 PM
Buzz
Towing and Hauling / RV
3
01-26-2003 11:13 AM
Buzz
Towing and Hauling / RV
13
01-24-2003 11:21 AM


Thread Tools
Search this Thread
Quick Reply: Prodigy P3 took a crap



All times are GMT -5. The time now is 10:52 PM.