Problem with boost gauge..........I think!
09-06-2007, 09:38 PM
#1
Registered User
Thread Starter
Join Date: Oct 2006
Location: NL, Canada
Posts: 22
Likes: 0
Received 0 Likes
on
0 Posts
Problem with boost gauge..........I think!
Hey guys!! I had my boost gauge installed a few days ago, and I don't know if its the gauge its self or the sending unit or maybe its working fine
, but with my diablo on the performance setting and at WOT it shows between 35/40 PSI and then suddenly drops between 20/25 PSI and stays there. Does this seem like its working fine, or should I be hitting a higher PSI without it dropping to 25PSI.
Also with the programmer returned to stock I'm hitting around 30PSI and the same thing happens, drops between 20/25 and stays there until I get off the fuel and back on it again.
Anyways, I don't know if its working right or if thats what its suppose to do, so hopefully someone will help me.
Thanks.
, but with my diablo on the performance setting and at WOT it shows between 35/40 PSI and then suddenly drops between 20/25 PSI and stays there. Does this seem like its working fine, or should I be hitting a higher PSI without it dropping to 25PSI.Also with the programmer returned to stock I'm hitting around 30PSI and the same thing happens, drops between 20/25 and stays there until I get off the fuel and back on it again.
Anyways, I don't know if its working right or if thats what its suppose to do, so hopefully someone will help me.
Thanks.
Thread
Thread Starter
Forum
Replies
Last Post
Performance & Accessories Bully Dog Triple Dog 40500 w/Crazy Larry, Outlook, boost gauge, pillar mount, boost f
gpshemi
3rd Gen All Products
0
07-19-2015 06:25 PM
Tank_66
3rd Gen High Performance and Accessories (5.9L Only)
7
02-28-2008 08:34 PM
turbomike
Performance and Accessories 2nd gen only
7
12-03-2007 09:31 PM
Sasqoutch
3rd Gen High Performance and Accessories (5.9L Only)
5
10-27-2007 01:08 PM
CRXsi
3rd Gen High Performance and Accessories (5.9L Only)
5
03-31-2006 07:56 AM