Probably get hammered but.........
#1
Registered User
Thread Starter
Probably get hammered but.........
I just bought quad's race box and I'm looking for a way to mount the in-cab switch stealth. I've searched all the threads and came up empty. Can anyone help?
#6
Registered User
Join Date: Jan 2006
Location: Pocatello, Idaho
Posts: 403
Likes: 0
Received 0 Likes
on
0 Posts
I took a peice of flat steel 3/4" wide by 1" long. Drilled 1/2" hole in one end for quad switch to mount in. In other end of steel plate I drilled 3/16" hole. I then took one of the mounting screws in the under side of dash out and screwed the 3/16" end of the plate there. That's were I mounted the plate with the switch in it. The switch is out of the way and hidden very well. It also can be removed in an instant with no added holes drilled in truck. I hope I explained this well enough. It does work very well.
#7
Registered User
Thread Starter
I took a peice of flat steel 3/4" wide by 1" long. Drilled 1/2" hole in one end for quad switch to mount in. In other end of steel plate I drilled 3/16" hole. I then took one of the mounting screws in the under side of dash out and screwed the 3/16" end of the plate there. That's were I mounted the plate with the switch in it. The switch is out of the way and hidden very well. It also can be removed in an instant with no added holes drilled in truck. I hope I explained this well enough. It does work very well.
Thread
Thread Starter
Forum
Replies
Last Post
Lurch519
24 Valve Engine and Drivetrain
1
01-18-2010 04:38 AM