2nd Gen. Dodge Ram - No Drivetrain Discussion for all Dodge Rams from 1994 through 2002. Please, no engine or drivetrain discussion.

Power Window Regulator

Old 01-08-2007, 08:54 PM
  #1  
Registered User
Thread Starter
 
thesheriff's Avatar
 
Join Date: Sep 2004
Location: Brentwood, CA
Posts: 61
Likes: 0
Received 0 Likes on 0 Posts
Power Window Regulator

I found out today that I have to replace the window regulator as a whole unit. This thing is pretty pricey through Dodge($250). Any suggestions one where I can get this unit at a more reasonable price? Also, is there a trick to changing this darn thing? It looks like a chore! Thanks for the help.
Old 01-08-2007, 09:01 PM
  #2  
Registered User
 
yfz450guy's Avatar
 
Join Date: Aug 2005
Location: vancouver, wa.
Posts: 663
Received 3 Likes on 1 Post
you could go used but how much longer would that one last?
not that hard to swap out. get the door panel off the roll the window down to gain access tot he bolts that hold the glass. remove bolts. push the glass up and tape it up at the top. roll regulator so that the arms are paralell. unbolt regulator. remove from door and unplug.
reinstall in reverse.
Old 01-09-2007, 06:22 AM
  #3  
Registered User
 
Greguw's Avatar
 
Join Date: Oct 2005
Location: Pennslyvania , Lower Bucks County
Posts: 326
Likes: 0
Received 0 Likes on 0 Posts
There easy to change ... if you can get the window down so you can reach the two glass mount bolts ...Undo them slide the glass up the track and tape the window up , unhook the wires take out the 4 bolts ...Then pull that sucker out !
I'm about to list a power window and lock set-up on here ...I pulled all this stuff out of a truck with under 100 K .

Greg
Old 01-09-2007, 03:51 PM
  #4  
Registered User
 
gorms's Avatar
 
Join Date: Jul 2006
Location: SE Mass
Posts: 1,497
Received 22 Likes on 21 Posts
$250 is way too much. I was pricing out regulators because I left the window down and it rained overnight, wouldn't go up in the mornin. Turned out to be just a jammed up unit, gave the regulator a little assistance while it was out and it worked fine. Anyhow, I got prices from $110-150 from various autopart stores. Try NAPA, or even some of the local guys can get it cheaper than that for sure.
Old 01-09-2007, 07:38 PM
  #5  
BCB
Registered User
 
BCB's Avatar
 
Join Date: Feb 2006
Location: Asheville NC
Posts: 567
Likes: 0
Received 0 Likes on 0 Posts
i replaced just the motor in mine for something like $58 form a local auto parts store. real easy job.
Old 01-09-2007, 07:43 PM
  #6  
Registered User
Thread Starter
 
thesheriff's Avatar
 
Join Date: Sep 2004
Location: Brentwood, CA
Posts: 61
Likes: 0
Received 0 Likes on 0 Posts
Ready to Tackle

Thanks for all of the help! I ordered the whole new unit online for a $100. After looking at it some more, the replacement doesn't seem that bad. But, we will see how my luck goes .
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
XLR8R
2nd Gen. Dodge Ram - No Drivetrain
26
01-02-2013 12:15 PM
rebal
2nd Gen. Dodge Ram - No Drivetrain
8
01-07-2011 09:42 PM
sdubfid
1st Gen. Ram - All Topics
9
12-22-2010 10:26 PM
Snapper
2nd Gen. Dodge Ram - No Drivetrain
4
09-08-2006 03:59 PM


Thread Tools
Search this Thread
Quick Reply: Power Window Regulator



All times are GMT -5. The time now is 03:49 PM.