Power door locks
#2
Registered User
The switch can corrode if it gets wet often. If you a re around salt air it probably is worse. You can lift the switch out of the ddoor panel w/o having to remove anything. Make a jumper and jump across the contacts to see if this is the problem.
If this isn't the problem it may be the solenoid for the locks or a connection to the actuator. Just my .02
Kurt
If this isn't the problem it may be the solenoid for the locks or a connection to the actuator. Just my .02
Kurt
Thread
Thread Starter
Forum
Replies
Last Post
nomad65
3rd Generation Ram - Non Drivetrain - All Years
1
08-20-2007 06:01 PM