24 Valve Engine and Drivetrain Discuss the 24 Valve engine and drivetrain here. No non-drivetrain discussions please. NO HIGH PERFORMANCE DISCUSSION!

Possible that my vacumn pump is dead? and where is it?

Old 03-29-2007, 10:11 PM
  #1  
Registered User
Thread Starter
 
Camarogenius's Avatar
 
Join Date: Feb 2007
Posts: 73
Likes: 0
Received 0 Likes on 0 Posts
Possible that my vacumn pump is dead? and where is it?

My vents don't work, no mkatter what setting it's on, it blows out the defroster. Also, my front axle isn't engaging.
The vacumn lines to the front axle were replaced by the dealer as a courtesey, while they installes a new ABS system. They said that my 4x4 should work now, but it doesn't.
How would I test the vacumn pump? My brakes are hydroboost, so they're not affected.
Old 03-29-2007, 10:21 PM
  #2  
Banned
 
smokindog's Avatar
 
Join Date: Mar 2005
Posts: 1,057
Likes: 0
Received 0 Likes on 0 Posts
Your vacuum pump is right under the VP44 and in front of the power steering pump. They don't typically go bad though... and for around $2000 + core they shouldn't!

I would check for vacuum leaks first.
Old 03-30-2007, 07:48 AM
  #3  
Chapter President
 
Rauschbo's Avatar
 
Join Date: Aug 2003
Location: Eagle. ID
Posts: 506
Likes: 0
Received 0 Likes on 0 Posts
...check just under the center of the cowl, there is a vacuum tee there...I've had two leaks, both were sourced to connections falling off of that tee.
Old 03-30-2007, 09:11 AM
  #4  
Chapter President
 
Mike D's Avatar
 
Join Date: Nov 2003
Location: Rural Hall, NC
Posts: 3,807
Likes: 0
Received 0 Likes on 0 Posts
Vacuum pumps can be had for way less the $2000 if that's your problem.
Old 03-30-2007, 04:56 PM
  #5  
Registered User
 
PChouinard's Avatar
 
Join Date: Nov 2002
Location: Az
Posts: 630
Likes: 0
Received 0 Likes on 0 Posts
Do you have cruise control? If so did it used to work and now doesn't? I broke the line going from pump to firewall while changing fuel filter. I got a vacuum line cap and cut the end off, made a perfect splice...gl
Old 03-31-2007, 09:04 AM
  #6  
Registered User
Thread Starter
 
Camarogenius's Avatar
 
Join Date: Feb 2007
Posts: 73
Likes: 0
Received 0 Likes on 0 Posts
My cruise Control works fine. So, I guess I need to start tracing vacumn lines.
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
whiteeye42
3rd Gen Engine and Drivetrain -> 2003-2007
4
09-19-2011 10:42 PM
Mopar Kid
1st Gen. Ram - All Topics
13
03-12-2007 11:23 PM
Bobcat698
12 Valve Engine and Drivetrain
5
04-17-2006 01:48 PM
Bobcat698
12 Valve Engine and Drivetrain
6
11-21-2005 09:19 PM
lenny
General Diesel Discussion
1
06-10-2003 09:27 AM


Thread Tools
Search this Thread
Quick Reply: Possible that my vacumn pump is dead? and where is it?



All times are GMT -5. The time now is 09:35 AM.