Mike D

I picked up a polishing kit from Harbor Freight some time ago, finally got a chance to use it. This is the housing of my new 64/71/14. Sorry for the poor picture quality.

smokin 5.9

looks good! have to do the intake too?!

Mike D

Thanks, Intake is red along with the valve cover.

Mike D

I just got to research for a good clear coat that won't turn color from heat.

alwaysbroke

compd had a thread about a clear coat, can't think of what section though

Moose10

Looks nice, and it appears to be on the kitchen counter!

ScottGregory

ANybody ever anodize these things to keep them looking that good. Nice Job Mike D.

renopker

clear powder coat

getblown5.9

get a sanding disk for an air grinder and sand those casting marks off then repolish it...makes the job look 10000x better

cheapskate

did your 'ol lady let you do that in the kitchen?

Diesel Doc

that looks good. the bad thing is that polishing something makes it harder to shed heat. in other words your compressor housing will run hotter now.

Mike D

I thought about doing that when I took off the Schwitzer name, but by then I had enough with the polishing.

bob4x4

not enough to be noticable

Bob

ScottGregory

MikeD, I'm sold on your idea. Did the Harbor Freight polishing kit perform as well as you expected? While most of my engine parts are at the machine shop the next few weeks, I may as well head out to the barn and start polishing.
Any body try the Duplicolor Engine Clear coat?

Mike D

Sure did, for $20.00 you can't beat it. The only brand I could find in clear coat which seemed to be worth anything was called VHT. Autozone carries the VHT brand but you'll probably have a hard time finding it in a clear. I had them order me a can, so I won't be able to clear coat the housing until Tuesday.