3rd Gen High Performance and Accessories (5.9L Only) Talk about Dodge/Cummins aftermarket products for third generation trucks here. Can include high-performance mods, or general accessories. THIS IS FOR THE 5.9L ONLY!

Where is the plug for the Boost Bolt?

Thread Tools
 
Search this Thread
 
Old 10-20-2006, 01:16 PM
  #1  
Registered User
Thread Starter
 
Bigdatty's Avatar
 
Join Date: Oct 2006
Location: North Carolina
Posts: 22
Likes: 0
Received 0 Likes on 0 Posts
Where is the plug for the Boost Bolt?

I've spent the day off putting my gauge pack in, all has gone pretty good, until I go to put the boost bolt in and I can't find the plug the directions say remove. I know it's got to be there, but danged if I can find it. I know it's between the fuel filter and firewall, but can somebody pinpoint it.

Thanks
Old 10-20-2006, 01:28 PM
  #2  
DTR Advertiser
 
Timinva's Avatar
 
Join Date: Sep 2002
Location: Va Beach,Va
Posts: 741
Likes: 0
Received 0 Likes on 0 Posts
You dont remove a plug. Just pull one of the inside manifold bolts. I usually use the one near the map sensor. Tim
Old 10-20-2006, 01:32 PM
  #3  
Registered User
 
RamWheelsBy4's Avatar
 
Join Date: Aug 2004
Location: Houston, TX
Posts: 3,697
Likes: 0
Received 1 Like on 1 Post
This is the bolt mine is in.

Old 10-20-2006, 02:29 PM
  #4  
Registered User
Thread Starter
 
Bigdatty's Avatar
 
Join Date: Oct 2006
Location: North Carolina
Posts: 22
Likes: 0
Received 0 Likes on 0 Posts
Thanks so much. My directions said "using a 3/4" drive extension, remove the 3/4" NPT plug and install the boost bolt in it's place". This was almost as frustrating as putting my tube of antisieze where "I wouldn't lose it" and not being able to remeber where I put it. OK, back to the garage. Thanks again, and especially for the pic.
Old 10-20-2006, 02:39 PM
  #5  
Registered User
 
RamWheelsBy4's Avatar
 
Join Date: Aug 2004
Location: Houston, TX
Posts: 3,697
Likes: 0
Received 1 Like on 1 Post
Originally Posted by Bigdatty
Thanks so much. My directions said "using a 3/4" drive extension, remove the 3/4" NPT plug and install the boost bolt in it's place". This was almost as frustrating as putting my tube of antisieze where "I wouldn't lose it" and not being able to remeber where I put it. OK, back to the garage. Thanks again, and especially for the pic.
I have probably at least two or three of half that kind of stuff somewhere in my garage for exactly the same reason .
Old 10-20-2006, 03:58 PM
  #6  
Banned
 
Speed Shift's Avatar
 
Join Date: Oct 2006
Location: Corpus Christi, TX
Posts: 1,136
Likes: 0
Received 0 Likes on 0 Posts
Originally Posted by Bigdatty
Thanks so much. My directions said "using a 3/4" drive extension, remove the 3/4" NPT plug and install the boost bolt in it's place". This was almost as frustrating as putting my tube of antisieze where "I wouldn't lose it" and not being able to remeber where I put it. OK, back to the garage. Thanks again, and especially for the pic.
You will probly find it when you fire it up.
Old 10-20-2006, 07:03 PM
  #7  
Registered User
Thread Starter
 
Bigdatty's Avatar
 
Join Date: Oct 2006
Location: North Carolina
Posts: 22
Likes: 0
Received 0 Likes on 0 Posts
Thanks for all the help guys, my mileage is gonna suck until I get bored with watching the needles swing! Found the antisieze in my shirt pocket.
Old 10-20-2006, 07:36 PM
  #8  
Registered User
 
carcrz's Avatar
 
Join Date: Jan 2006
Location: Belton, MO
Posts: 531
Likes: 0
Received 0 Likes on 0 Posts
Sounds like me. Yesterday I searched for my keys for 2 hours. I was at my dad's house so I didn't have a spare set w/ mo so I had to find them. Guess where they were -- in my pocket. Who'd a thunk it, huh.
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
FordTrax
2nd Gen. Dodge Ram - No Drivetrain
4
04-18-2014 08:47 PM
moparmatt
3rd Gen High Performance and Accessories (5.9L Only)
9
04-25-2007 02:13 PM
ctturbodiesel
24 Valve Engine and Drivetrain
6
12-13-2006 09:37 AM



Quick Reply: Where is the plug for the Boost Bolt?



All times are GMT -5. The time now is 01:11 AM.