plenty of power but no smoke!
#1
plenty of power but no smoke!
i have been tinkerin with the pump on my truck and i have plenty of power now but no black smoke. what do i adjust to get that black cloud that i want. thanks Ed
#3
Registered User
Join Date: Dec 2006
Location: Tennessee
Posts: 398
Likes: 0
Received 0 Likes
on
0 Posts
remove turbo, or remove spring from under the fuel pin,or you can turn the torx screw with a locknut under the the little cap on top all the way down, and turn the starwheel as clockwise as possible
#6
Muted User
take the top off your pump, 4 screws and banjo fitting on the back, and rotate the fuel pin so the notch is to the front and turn the star wheel till it bottoms out and sometimes you can remove the spring that sets on top of the star wheel, also you can run the fuel screw in then back your idle screw out.
Thread
Thread Starter
Forum
Replies
Last Post
blackcloud03
3rd Gen High Performance and Accessories (5.9L Only)
2
11-13-2009 08:38 AM
JThiessen
3rd Gen High Performance and Accessories (5.9L Only)
16
08-22-2009 02:46 PM
MFEUSAF
3rd Gen High Performance and Accessories (5.9L Only)
4
05-09-2009 07:33 AM
lezmark7
24 Valve Engine and Drivetrain
8
10-09-2007 05:10 PM