PLEASE HELP 02 DODGE CTD Starting problems
#1
PLEASE HELP 02 DODGE CTD Starting problems
If my engine is warm and I shut it off it will not start again until the engine cools off. Does any 1 have idea what is wrong. The vehicle is an 02 CTD. PLEASE ANY ADVICE would be great.
#6
If you don't know how on an 02 you can pull codes very easily.
Get a pencil and paper ready
Turn the key on for a second
Turn the key off for a second
Turn the key on for a second
Turn the key off for a second
Turn the key on and leave it on
Watch in the digital odometer window
Keep watching until you see pDone
Jim
Get a pencil and paper ready
Turn the key on for a second
Turn the key off for a second
Turn the key on for a second
Turn the key off for a second
Turn the key on and leave it on
Watch in the digital odometer window
Keep watching until you see pDone
Jim
#7
Registered User
Join Date: Jul 2003
Location: The Great White North
Posts: 7,129
Likes: 0
Received 0 Likes
on
0 Posts
The ONLY way to make sure you have ALL the codes is to have it scanned with an OBDII code reader.
Hard starts when warm and white smoke when it starts are classic signs of a dead Injector Pump. If thats the case, the codes will be P1688, or P0126. My guess is that both the lift pump AND injector pumps are shot.
Texan, if you dont already have a fuel pressure guage in the cab - its time to get one.
Hard starts when warm and white smoke when it starts are classic signs of a dead Injector Pump. If thats the case, the codes will be P1688, or P0126. My guess is that both the lift pump AND injector pumps are shot.
Texan, if you dont already have a fuel pressure guage in the cab - its time to get one.
Thread
Thread Starter
Forum
Replies
Last Post
Texan
3rd Gen High Performance and Accessories (5.9L Only)
4
04-21-2007 05:33 PM
edy
3rd Gen Engine and Drivetrain -> 2003-2007
5
03-25-2006 07:46 PM