Please explain 1/8" NPT Pipe tap
#1
Registered User
Thread Starter
Join Date: Jan 2006
Location: Gonzales Co., Texas (HOOK'EM & Gig'em!)
Posts: 312
Likes: 0
Received 0 Likes
on
0 Posts
Please explain 1/8" NPT Pipe tap
Can someone PLEASE explain how they come up with the name 1/8" NPT
pipe tap.
I installed my thermocouple this weekend & used it. 1/8" npt seems to be a standard for this tap. All other taps are named by thier true diameter.
The 1/8" NPT tap is NOWHERE NEAR 1/8" (.125) It is more like 11/32
pipe tap.
I installed my thermocouple this weekend & used it. 1/8" npt seems to be a standard for this tap. All other taps are named by thier true diameter.
The 1/8" NPT tap is NOWHERE NEAR 1/8" (.125) It is more like 11/32
#2
National Pipe Thread.
It is based on the inside diameter (ID) of the actual pipe that will be threaded into it. So, adding up the wall thickness' of the actual pipe material, plus the ID.....
(I think)
It is based on the inside diameter (ID) of the actual pipe that will be threaded into it. So, adding up the wall thickness' of the actual pipe material, plus the ID.....
(I think)
#3
Registered User
From a pipe fitting manufacturer:
Rusty
Pipe Thread Sizes
Originally, pipes were specified with a standardized outside diameter (OD) and wall thickness so that the nominal pipe size would approximately equal the inside diameter (ID).
Originally, pipes were specified with a standardized outside diameter (OD) and wall thickness so that the nominal pipe size would approximately equal the inside diameter (ID).
#4
Registered User
Thread Starter
Join Date: Jan 2006
Location: Gonzales Co., Texas (HOOK'EM & Gig'em!)
Posts: 312
Likes: 0
Received 0 Likes
on
0 Posts
???... You then would have a pipe smaller than 1/8". Its crazy to me.
Why not be like all the other taps & name it by the DIAMETER IT IS.
Back to the salt mine!
Why not be like all the other taps & name it by the DIAMETER IT IS.
Back to the salt mine!
#5
Registered User
Join Date: Dec 2006
Location: Indianapolis Ind
Posts: 136
Likes: 0
Received 0 Likes
on
0 Posts
#7
Registered User
Thread Starter
Join Date: Jan 2006
Location: Gonzales Co., Texas (HOOK'EM & Gig'em!)
Posts: 312
Likes: 0
Received 0 Likes
on
0 Posts
The drag race I went to the other day.....Sign said "1/8 mile tonite only"
It was a 1/4 mile track. It was tore up from an accident the previous nite.
I asked the lady in the ticket booth if the tickets were 1/2 price then...She got all flustered with me...No sense of humor
Trending Topics
#9
Registered User
There is also a diference in the hole diameter that you drill if it is a NPT or NPTF. The NPT is a bigger hole and requires the use of thread sealent such as teflon where NPTF uses a smaller hole and has tighter tolerences and is a dry seal so theoreticly you dont need any thread sealent.
#10
Also remember that the idea behind the NPT is that it is a tapered thread so it seals properly and won't leak.
You can get away with a standard size tap (can't remember exactly which one) and still screw the thermocouple in but, it will be straight walled threads and will leak.
You can get away with a standard size tap (can't remember exactly which one) and still screw the thermocouple in but, it will be straight walled threads and will leak.
#11
Registered User
Thread
Thread Starter
Forum
Replies
Last Post
LovinTheTorque
3rd Gen Engine and Drivetrain -> 2003-2007
10
09-14-2013 12:02 PM
glarior
3rd Gen Engine and Drivetrain -> 2003-2007
9
05-17-2011 07:46 PM
JyRO
Performance and Accessories 2nd gen only
25
09-19-2007 07:24 PM