A Pillar wanted
#1
Registered User
Thread Starter
Join Date: Feb 2004
Location: Urbana, Ohio
Posts: 22
Likes: 0
Received 0 Likes
on
0 Posts
A Pillar wanted
Hey All,
Not sure this is where I should do this but here goes. I am a big guy and use the grab handle on the A Pillar to get into the truck. A few wekes ago the bolts pulled through the plastic and it broke away from the metal Pillar. I've tried to glue it back together but the plastic is just broken too much.
I looked on eBay but didn't find one anywhere. I figured there are several guys on here that have replaced their A Pilliar for a guage set.
If this is not where I should be doing this I'm sorry guys.
Not sure this is where I should do this but here goes. I am a big guy and use the grab handle on the A Pillar to get into the truck. A few wekes ago the bolts pulled through the plastic and it broke away from the metal Pillar. I've tried to glue it back together but the plastic is just broken too much.
I looked on eBay but didn't find one anywhere. I figured there are several guys on here that have replaced their A Pilliar for a guage set.
If this is not where I should be doing this I'm sorry guys.
Last edited by Totallyrad; 05-16-2007 at 07:20 PM. Reason: Profanity S/L
#2
Administrator / Free Time Specialist
Join Date: Nov 2005
Location: Birmingham, Alabama
Posts: 7,707
Likes: 0
Received 14 Likes
on
8 Posts
You'll need to place an ad in the classifieds here, it's free by the way. I'm sure anybody who may have personal knowledge of where one is located will gladly send you a pm.
#4
Registered User
I think the dealer cost for mine was about $27, less than $30 I know. Just go to a dealer parts department. The replacement on mine had stronger reinforcement around the bolt holes than my original A-Pillar on my 04.5.
Thread
Thread Starter
Forum
Replies
Last Post
Mopar_Mudder
3rd Generation Ram - Non Drivetrain - All Years
5
11-16-2002 01:30 PM
rattle_rattle
Performance and Accessories 2nd gen only
20
10-31-2002 10:41 AM