TNLoneWolf

I've bought a used unit from on EBAY and the very last connection is the "red wire" to the wiring harness connecting to the "pink w/ gray tracer". The question is "Where is the "red wire in the Banks kit, is it in the large "loom" of wire I pulled through the firewall or is it in the small "unshielded" piece that has 1-red and 1-yellow and 1-black wire in it also. Since I bought it used, I don't have any packing list do identify all the pieces of wire, I done the entire install today and can't get connected to a power source yet. Please HELP!
The small piece I described looked like it was run up the pillar to the boost gauge, so I didn't pull it thought the firewall it first. It was the only extra piece of "wire" lsft over and it did have a Banks part number on it, but it also had the other three colored wires I mentioned. Any helpo would be great!Thanks

firemansdiesel

Print this out.

http://www.bankspower.com/OwnersManuals/96464.pdf

TNLoneWolf

Thanks, but I have the Manual. I'm just trying to find out where the "red wire" for power is located. I'll check the fuse tomorrow and trace that wire and see where it leads.
Thanks