Hey guys, me and SMKHZRD are trying to put together a dodge dyno day for the fall. We will be dynoing at Chucks speed and rv center. Address is 2923 W. Weldon Phoenix, AZ 85017 price will be $50 dollars per truck to dyno. You will get two pulls with Hp and TQ readouts. There will also be a BBQ for lunch. If you dont want to dyno then come on down and watch the smoke and good times roll. The shop has two dates available and they are 10/31/09 or 11/7/09 and both are on saturdays. We want to know which date works for everybody. We are hoping to find around 20 trucks or so to dyno. Let me know who wants to come. Should be a great time! Nothing set in stone yet, just gauging interest. Anybody ever been to this shop before?

Count me in if the day ends up being 10/31. I have to work if the weekend after. Yes I have been there before its a nice shop. Dyno is seperate form the rest of the shop.

sweet we will put u down...

Gee I hope I don't end up being a sore thumb up there being a 3rd gen and all.

not at all man...

Hopefully you wont be alone, I'm trying to convince my dad to dyno is 05.......

What time of day on 10/31? I wouls like to get a baseline for my truck since it is mostly stock. I have kids that like to do the halloween thing so I would like to do it late morning or early early afternoon.
I'll keep an eye on the thread.

I am thinking this will be going on most of the day.

Hey soot how does the super 40 hybrid work with those 190s. Sounds like it would be a sweet combo.

Ya, I like it. I dont know how much better it is over a standard 40, but I think it whistles a little louder[guitar][guitar]. This thing rocks with my ddp3 injectors I have now.... need to update sig.... I see about 36 psi now and thats with a camshaft.

I'd be a spectator for either day...

Tony

Do they still run the Mustang Dyno?

Yes, but I dont know what model it is. I haven't had a chance to go down to the shop yet.

I ran my truck on their dyno and received a bit of flak about it.
I also took it across town to run on a dynojet just to compare results.

http://www.dieseltruckresource.com/dev/cfm-stock-truck-dynod-t191452.html?t=191452

http://img229.imageshack.us/img229/1599/dscn5621ho9.jpg

interesting reading there guys. drednot, where was the place with the dynojet you found?

nevermind, numbers from the printed sheet weren't calculated... [laugh]

interesting reading there guys. drednot, where was the place with the dynojet you found?

It was a place called Arizona DynoChip in Chandler,AZ

sorry if the previous post makes me sound like a smarta**. we all were rackin' our brains in the chat tonight trying to figure out what happened at chuck's.

So how big is the list now. I know I'll be there but don't know if it will be with my pile.

so far we probally got at leas 15 people...whats wrong with ur truck?

In the r&d phase of the VGT! Got it bolted up tonight. Need to come up with the 3" boot, I thought it was a 2.5 when I was looking at it. I got some time til the event goes on so I may make it with my pile?
You know the real law on hood stacks here in AZ, I've been told both ways yes and no.

i think no

Alright I didn't think so, I once asked a DPS guy and he gave me a weird look, was in the middle of explaining it and well I said screw it.
Got that VGT on, not very impressed with it so far. Need to clean up some stuff and see if it gets any better. Of course are any of us ever satisfied with how our trucks are doing?
Justin

nope i keep doing stuff to my truck...its like a disease and cant stop[laugh][laugh]

Hey guys we decide on a place its going to be Bartling's. the day is going to be 11/07/09 time to be there 7am the cost will be $70 for three pulls...thats as cheap as they would go...it is a dynojet dyno...Let us kow if u can go and we will start throwing ur guys names on the list. Thanx

Sorry address is 22430 s. scotland ct Queen creek az 85242

I have to check my drill schedule with the guard. I will PM back asap. thanx

I have drill that weekend.. I'll look for the next dyno day..

I'll be spectatin'!

That sucks PChouinard, next time.

This is the dyno list so far. If I forgot you on the list let me know asap and I'll get you on or if you just want to come and watch let me know, I need to know how much food to arrange for. Thanks guys.

Trucks coming to play:

SOOT4BRAINS
SMKHZRD
Jimbo
Matchew
AZCOWBOY09 +2
NTWDIESEL
Hondarider552
phatboy07
Hutch
dcrenshaw26
Goslin32
Randy
Soot4brains05
Brian +1
Matt 12
a hopper
bigred cummins
n7ki
MMLMM (trickthree)
Greatwhite
Dangerous
Slated4Greatness
Dunesrunner08
lb7blksmk
NEMO
ridingchevy13
duramaxxx

Trucks coming to watch:

Wildcat
Greatwhitehope
cummin2drescue
diesel6.7
albie30
killerbee
RidingGMC
tonewhy
turbotug
blksmok

EDIT WE ARE AT 27 TRUCKS NOW, IF YOU WANT TO GO PLEASE POST ASAP!!!

Bump! You can put me on tentative attendance :)

I'll be bringing the cummins crew to watch...

-Nick

My drill dates for November have been changed... Can I still get in on the dyno?

So what ever happened? Sure is quiet...

The highest numbers I believe were from a Diapermax. If I remember right it was 587HP and TQ I don't remember. We were done with the pulls by 11:30am. Id love to get a better showing out at Firebird or get another dyno day together with more people hanging out or running their trucks.

The highest numbers I believe were from a Diapermax. If I remember right it was 587HP and TQ I don't remember.

That's an impressive number- So how many ended up showing up in total?

14 trucks dyno'd. My list had over 30 trucks to dyno, some guys left before getting on the rollers, and a bunch just didn't show up.