PDR Twins VS BD Twins?
#1
Registered User
Thread Starter
Join Date: Nov 2009
Location: SC
Posts: 21
Likes: 0
Received 0 Likes
on
0 Posts
PDR Twins VS BD Twins?
Thinking about either the PDR stage 5 or 6 twins or the BD tow twins which set would you guys recommend for spool up and power?(looking for 650-700hp) Going with SDX stage 4 injectors. Pretty much never tow just DD. thanks for the help guy's
Last edited by usmcdbd; 06-08-2010 at 08:35 PM. Reason: wrong twin kit #'s
#3
Registered User
Thread Starter
Join Date: Nov 2009
Location: SC
Posts: 21
Likes: 0
Received 0 Likes
on
0 Posts
It's for my 98. Right now it's stock but about to do a mass order. Truck is my DD never tow. Just want to make it fun to drive and not have to worry about egts, also looking for relatively quick spool up. thanks again for the help
#5
Registered User
Join Date: Sep 2008
Location: COOS BAY OREGON
Posts: 79
Likes: 0
Received 0 Likes
on
0 Posts
Look into the setup that Source Automotive sells. Great kit and very easy to upgrade in the future!! My buddy runs them and it flat out moves! Check out their website or give Bill or Rip a call. Best guys to work with by far!!
#6
The R700 is a great all around turbo set up. You will have very good bottom end throttle response and tonnes of air to keep the egts down. It would also still have some growing room for you as well. We are a Borg Warner engineering house here, so this isnt a "lets try this and lets try that and hope it works" setup. This is where the great all around performance comes from. These are complete kit. You get he manifold new airbox and all the hardware needed. This is a bolt on kit, no fabrication needed.
If you need any other information at all just let me know.
If you need any other information at all just let me know.
#7
Registered User
Join Date: Mar 2004
Location: Wichita, Kansas
Posts: 1,385
Likes: 0
Received 0 Likes
on
0 Posts
The R700 is a great all around turbo set up. You will have very good bottom end throttle response and tonnes of air to keep the egts down. It would also still have some growing room for you as well. We are a Borg Warner engineering house here, so this isnt a "lets try this and lets try that and hope it works" setup. This is where the great all around performance comes from. These are complete kit. You get he manifold new airbox and all the hardware needed. This is a bolt on kit, no fabrication needed.
If you need any other information at all just let me know.
If you need any other information at all just let me know.
Trending Topics
#10
#11
Registered User
Join Date: Apr 2006
Location: Mission, BC
Posts: 181
Likes: 0
Received 0 Likes
on
0 Posts
Sorry to hijack the thread... but I've got a super b special on my 94... is there a upgrade to a twins kit you guys sell? I looked on your site but didn't see one for 94's
#12
#13
The Guru
Join Date: Jan 2004
Location: Airdrie Canada
Posts: 6,589
Likes: 0
Received 0 Likes
on
0 Posts
Pat, what turbos you running on the R700? you guy still running the smaller S300 stuff, or findly decided to use the S475? Personally, I would run a ball bearing GT3788R over a K-31. Faster spooling and way more air. I've run a few sets now. Probably also alot less money than a BD or PDR set of twins. I have a local shop that we actually do turbo R&D. Different impellers and housings from different turbos. Lots of things can be done to improve air flow and spool-up that don't cost to much $$$.
#14
Registered User
Join Date: Mar 2004
Location: Wichita, Kansas
Posts: 1,385
Likes: 0
Received 0 Likes
on
0 Posts