Part # for vacuum pump shaft seal??
#1
Part # for vacuum pump shaft seal??
I am sort of in a tight spot for money right now otherwise I would just buy the repair kit from www.fixinrams.com but I'm a mechanic and think I can tackle the job, I just need the part #'s of the shaft seal and any other seals needed. Is the oil supply line on the bottom of the vp a JIC fitting? I saw a thread on here a while back that had the napa part# for the shaft seal but I can't seem to find it back.
Thanks,
-Ryan
Thanks,
-Ryan
#2
Administrator
The seal is a double lip vitton rubber seal that can be found at a hydraulics shop. I don't remember what the dimensions on it are though.
I did the fixinrams repair. I paid ~$60 and got the seal, several O-rings, assembly grease, several presses for getting the seals/parts in and out and a good video on how to repair it.
I don't remember what size the oil line fitting is, but I remember using an open end wrench on it.
I did the fixinrams repair. I paid ~$60 and got the seal, several O-rings, assembly grease, several presses for getting the seals/parts in and out and a good video on how to repair it.
I don't remember what size the oil line fitting is, but I remember using an open end wrench on it.
#3
Registered User
I am sort of in a tight spot for money right now otherwise I would just buy the repair kit from www.fixinrams.com but I'm a mechanic and think I can tackle the job, I just need the part #'s of the shaft seal and any other seals needed. Is the oil supply line on the bottom of the vp a JIC fitting? I saw a thread on here a while back that had the napa part# for the shaft seal but I can't seem to find it back.
Thanks,
-Ryan
Thanks,
-Ryan
#4
Is there a mopar # that crosses to that cummins # or do you have to get it from cummins? Is there any online vendor for cummins? If not I can probably find it maybe even through work.
#5
Registered User
Join Date: Oct 2006
Location: Annapolis, Md
Posts: 719
Likes: 0
Received 0 Likes
on
0 Posts
Check this link. $15 + $6 for the o-rings, seal and gasket.......
http://hectorwithinjectors.com/DODGEDIESELPRODUCTS.aspx
This guy has a 100% rating on E-bay, so I assume he is honest and trustworthy.
http://hectorwithinjectors.com/DODGEDIESELPRODUCTS.aspx
This guy has a 100% rating on E-bay, so I assume he is honest and trustworthy.
#6
Registered User
Check this link. $15 + $6 for the o-rings, seal and gasket.......
http://hectorwithinjectors.com/DODGEDIESELPRODUCTS.aspx
This guy has a 100% rating on E-bay, so I assume he is honest and trustworthy.
http://hectorwithinjectors.com/DODGEDIESELPRODUCTS.aspx
This guy has a 100% rating on E-bay, so I assume he is honest and trustworthy.
Trending Topics
Thread
Thread Starter
Forum
Replies
Last Post
jimbo486
1st Gen. Ram - All Topics
14
05-08-2016 06:07 PM
jsimpson
2nd Gen. Dodge Ram - No Drivetrain
2
09-04-2003 09:39 PM
yomitch
12 Valve Engine and Drivetrain
2
04-21-2003 06:28 PM