Outer bearing won't go on spindle :(
10-13-2009, 02:45 PM
#1
DTR question asker
Thread Starter
Join Date: Dec 2006
Location: Chapel Hill, NC
Posts: 869
Likes: 0
Received 0 Likes
on
0 Posts
Outer bearing won't go on spindle :(
Stuff like this always seems to hold me up. I'm finishing up putting my front end back together after the new ball joints, etc., and I went ahead and got new front wheel bearings for my 2WD 3500. The drivers side went on fine, the outer wheel bearing went right in when I turned the nut. But on the other side it doesn't want to go on. The inner bearing went on fine. I can the outer bearing about 1/8th of an inch on the spindle and then it just doesn't want to go on any more. I've tried pushing it on by hand and by tightening the nut but no luck. Any idea why its doing this?
Thread
Thread Starter
Forum
Replies
Last Post
Bobcat698
12 Valve Engine and Drivetrain
15
05-19-2010 04:50 PM
DodgeChallenger
3rd Generation Ram - Non Drivetrain - All Years
9
05-01-2010 03:07 AM
cuccamonga
12 Valve Engine and Drivetrain
3
09-26-2007 06:12 PM
justagoodolboy
1st Gen. Ram - All Topics
8
12-22-2006 12:20 PM