PDA

View Full Version : Ordered parts this week


getblown5.9
01-14-2008, 11:00 PM
both front axle seals, a pair of lower ball joints, upgraded valve springs, and a roll pan. gotta plan a cave day with scott to get my ball joints/axles seals in...the ball joints are beginning to worry me.

im about 50% of my way to being ready to pull.

still need to order the redline box, and if the side job goes well at work, a set of rims and tires.

06 DIESEL
01-15-2008, 05:20 AM
Congrats TJ, let me know when you are wrenching, I will give you a hand.

getblown5.9
01-15-2008, 07:18 AM
I shipped the axle seals and ball joints UPS 2nd day air to have them this weekend just in case

skynyrd
01-15-2008, 12:38 PM
well if we meet saturday for planning for TS we can always mess with the axle seals and and lower ball joints

Sunir
01-15-2008, 03:10 PM
both front axle seals, a pair of lower ball joints, upgraded valve springs, and a roll pan. gotta plan a cave day with scott to get my ball joints/axles seals in...the ball joints are beginning to worry me.

im about 50% of my way to being ready to pull.

still need to order the redline box, and if the side job goes well at work, a set of rims and tires.

when's your first event? U gonna be ready for 'em boyz out at TS :eek:

JPR Ram
01-15-2008, 06:40 PM
GetBlown5.9 - I'm not the one seling this Redline box, but I seen it in some classifieds on another forum.
http://www.dieselbombers.com/showthread.php?t=8534

getblown5.9
01-18-2008, 10:21 AM
axle seals are here!!!

roll pan will be here monday

redline is being shipped monday

getblown5.9
01-18-2008, 03:54 PM
argghhhh, roll pan came today...i was all stoked, took it out of the box and its the wrong one...no license plate cut out on it...have to send it back and get another one :(

getblown5.9
01-22-2008, 10:00 AM
ooooh ooooh oooooh another box came today

http://www.mustangmods.com/ims/u/908/8650/217850.jpg

06 DIESEL
01-22-2008, 03:31 PM
So when are we installing those?

getblown5.9
01-27-2008, 08:46 AM
just wanted to give a big thanks to Travis for coming by and lending a hand for a few hours mounting my roll pan and fabbing some stuff up. i ended up working another 3-4 hours after he left tho even in the 30* temps with no heat.

pulling season is getting so close, i cant wait.

http://www.mustangmods.com/ims/u/908/11722/218757.jpg
http://www.mustangmods.com/ims/u/908/11722/218758.jpg
http://www.mustangmods.com/ims/u/908/11722/218759.jpg
http://www.mustangmods.com/ims/u/908/11722/218760.jpg

bootsdodgejn
01-27-2008, 09:58 AM
very nice tj
speakin of pulls do u know when the first one is

getblown5.9
01-28-2008, 10:33 AM
and what should be the last delivery for awhile...

getblown5.9
02-02-2008, 05:30 PM
http://www.mustangmods.com/ims/u/908/11722/220086.jpg
http://www.mustangmods.com/ims/u/908/11722/220087.jpg
http://www.mustangmods.com/ims/u/908/11722/220088.jpg
http://www.mustangmods.com/ims/u/908/11722/220089.jpg
http://www.mustangmods.com/ims/u/908/11722/220090.jpg

getblown5.9
02-02-2008, 05:36 PM
http://www.mustangmods.com/ims/u/908/11722/220091.jpg

took me and my buddy doug about 6 hours to fab this up, will get mounted to the frame using (6) 1/2" grade 8 bolts, and its all structural heavy wall tubing and angle. the main piece where the weights hang is an I-beam that was cut in half. all pretty heavy stuff.

we painted it with some rust inhibiting paint and ill be able to mount it on the truck tomorrow.

ramsport59
02-02-2008, 06:42 PM
very nice TJ.....

Rick

06 DIESEL
02-02-2008, 07:00 PM
Looks good TJ, glad that some of that steel was able to be used.

TKC2000
02-05-2008, 07:48 AM
Good job TJ.

I was going to mention that the pics were missing beer cans, but then I realized it wasn't done at the Cave. [laugh][laugh]