Open Diff from Factory
#3
Registered User
Join Date: Jun 2005
Location: Cold bowl in North Pole, AK
Posts: 98
Likes: 0
Received 0 Likes
on
0 Posts
There isn't a locker for the rear yet as far as I know. I believe Eaton and arb make one for the front. or you can get the one that is in the power wagon for the front.
#4
If your axle is Dana 80, Detroit makes a locker, but it is automatic, and I think ARB has one too. I settled for the Dana power loc, and if you rearrange the clutch pack, you can make it very aggressive. I can lift three wheels off the ground, and the one remaining wheel will pull the truck off the blocks.
#7
Registered User
Join Date: Jun 2004
Location: south texas
Posts: 146
Likes: 0
Received 0 Likes
on
0 Posts
gov loc
tha amm axle takes a govloc you can get it for randys ring and pinion the carrier with bearings was about $582 just priced one for my 3500 cause i had a bearing go out @ 85k miles they use koyo bearings i opted to use timkin bearings it took a little while to cross them over but i think they will be worth it in the long run b.t.w the amm carrier is not serviceable so if something goes wrong with it you will have to be the whole thing
Trending Topics
#8
Registered User
Join Date: Mar 2005
Location: DFW, TX
Posts: 331
Likes: 0
Received 0 Likes
on
0 Posts
There's not much you can do right now. You can order the AAM limited slip from Randy's and put it in your self (Dealer quoted me $1200-1500 to put it in). There is no locker available today, but I'm told ARB is working on one as we speak. They only thing you can do is sit tight and play the waiting game.
#9
The Dodge 'Power Wagon' (?) has lockers front and rear. Although it has a 10.5 in rear it does have the same 9.25in front axle so you could look into putting a selectable locker up front. You wouldn't want to use it for heavy loads but it should work very well otherwise as our trucks are very nose heavy.
Thread
Thread Starter
Forum
Replies
Last Post
nate_88
24 Valve Engine and Drivetrain
4
07-19-2009 06:20 PM
Desert Diesel
Performance and Accessories 2nd gen only
3
03-18-2007 08:53 PM
sqrl$$
3rd Gen Engine and Drivetrain -> 2003-2007
16
01-06-2007 05:28 PM
djp9747
3rd Gen Engine and Drivetrain -> 2003-2007
19
10-02-2004 09:55 AM