okay....anyone know DV's?
#1
Registered User
Thread Starter
Join Date: Feb 2008
Location: live oak, ca
Posts: 391
Likes: 0
Received 0 Likes
on
0 Posts
okay....anyone know DV's?
i have the 131's currently in my pump, i now have a set of 181's i was going to install with the 131 holders. but i would to know the purpous of doing this,
and i have a set of dv's that i removed from a john deere tractor that have102 marked on them and look like the 181's but the very bottom edges (the 4 corners) of the valve are rounded, the 4 slots go higher up the valve and the ring just above the slots is narrower than the 181's. looks to me like a step up from the 181's but does anyone know what the numbers mean on the dv,s?
and i have a set of dv's that i removed from a john deere tractor that have102 marked on them and look like the 181's but the very bottom edges (the 4 corners) of the valve are rounded, the 4 slots go higher up the valve and the ring just above the slots is narrower than the 181's. looks to me like a step up from the 181's but does anyone know what the numbers mean on the dv,s?
Thread
Thread Starter
Forum
Replies
Last Post
ratlratl
3rd Gen Engine and Drivetrain -> 2007 and up
81
03-12-2010 09:04 PM
jeffs07mega
3rd Gen High Performance and Accessories (5.9L Only)
7
02-24-2009 02:47 AM