3rd Gen High Performance and Accessories (5.9L Only) Talk about Dodge/Cummins aftermarket products for third generation trucks here. Can include high-performance mods, or general accessories. THIS IS FOR THE 5.9L ONLY!

Oil Pressure

Old 08-06-2008, 11:43 PM
  #1  
Registered User
Thread Starter
 
GOT BOOST?'s Avatar
 
Join Date: Mar 2007
Posts: 281
Likes: 0
Received 0 Likes on 0 Posts
Oil Pressure

Hey guys does dipricol make an oil pressure gauge? I am getting ready for a few minor changes. For those who are running them what kind of numbers do you see? Jay
Old 08-07-2008, 06:56 AM
  #2  
Registered User
 
TonyB's Avatar
 
Join Date: May 2005
Location: Gilbert, Az
Posts: 1,607
Likes: 0
Received 1 Like on 1 Post
DOn't know anything about dipricol.

My oil pressure runs at the following pressures:
Idle, HOT day, 200-210F Engine: 6-8psi
2500rpm, 200-210F Engine: 40-50psi
Cold start, hot day/cold day: >60psi
Winter Idle, hot engine: 10-12psi

Tony
Old 08-07-2008, 09:34 AM
  #3  
Banned
 
enafzige's Avatar
 
Join Date: Nov 2006
Location: Knoxville, TN
Posts: 1,018
Likes: 0
Received 0 Likes on 0 Posts
I used a 0 - 100 psi fuel pressure gauge from DiPricol, and it's been working great for 25k miles.

--Eric
Old 08-07-2008, 10:00 AM
  #4  
Registered User
 
lmills's Avatar
 
Join Date: Jan 2006
Location: swinging wrenches in MD
Posts: 1,484
Likes: 0
Received 0 Likes on 0 Posts
If you are looking for a pressure range. I would recommend a 0-100 PSI gauge. I know on a cold start mine can pretty much peg that when the oil is thick. Once warmed up I run around 65 psi cruising on the interstate
Old 08-07-2008, 12:11 PM
  #5  
Registered User
Thread Starter
 
GOT BOOST?'s Avatar
 
Join Date: Mar 2007
Posts: 281
Likes: 0
Received 0 Likes on 0 Posts
Thanks guys, I guess I dont need an isolator. Where would you tap into the system? I will be running an amsoil bmk-25 remote setup to make room for the new addition(s) to the family Jay
Old 08-07-2008, 12:28 PM
  #6  
Registered User
 
lmills's Avatar
 
Join Date: Jan 2006
Location: swinging wrenches in MD
Posts: 1,484
Likes: 0
Received 0 Likes on 0 Posts
tap in on the port on top of the oil filter head. They are 1/8" NPT
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Power Ram 250 C
1st Gen. Ram - All Topics
4
02-20-2007 11:08 AM
streetsmoker
3rd Gen High Performance and Accessories (5.9L Only)
5
02-22-2006 06:47 PM
bigragu
1st Gen. Ram - All Topics
4
01-24-2006 11:16 AM
CIN'S DODGE
24 Valve Engine and Drivetrain
16
12-05-2005 04:14 PM


Thread Tools
Search this Thread
Quick Reply: Oil Pressure



All times are GMT -5. The time now is 06:39 PM.