Oil leak by P/S pump or vacumn pump?
#1
Registered User
Thread Starter
Join Date: Mar 2005
Location: Amherst, WI
Posts: 1,146
Likes: 0
Received 0 Likes
on
0 Posts
Oil leak by P/S pump or vacumn pump?
I noticed a small amount of oil dripping from the vacumn pump (in front of the P/S pump)
Its not PS fluid, but black engine oil.
Could this have anything to do with my dash vents/cruise control working intermittently?
THX
Its not PS fluid, but black engine oil.
Could this have anything to do with my dash vents/cruise control working intermittently?
THX
#3
Registered User
Thread Starter
Join Date: Mar 2005
Location: Amherst, WI
Posts: 1,146
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by LAUNA EQUIPMENT
your oil leek, is it from your bobcat?
We have a 4475 John Deere Skid steer.. its been a POS!
#4
Registered User
Join Date: Oct 2005
Location: Pennslyvania , Lower Bucks County
Posts: 326
Likes: 0
Received 0 Likes
on
0 Posts
Re : leak
I have been working on my leak for a few weeks now ... I first tried just doing the seal in the vacume pump ... If you have any type of groove in your power steering pump ... Do not put your new seal all the way in side your vacume pump housing ... the seal will need a new clean surface to ride on .
My pump had a really bad grove ... I had to replace my power steering pump to solve my problem ... I just installed a new seal in the vacume pump tonight ... the whole job was done in under 2hrs .
If you do a search on leaking vacume pump ... you should find all the info you need to do the job .
Greg
My pump had a really bad grove ... I had to replace my power steering pump to solve my problem ... I just installed a new seal in the vacume pump tonight ... the whole job was done in under 2hrs .
If you do a search on leaking vacume pump ... you should find all the info you need to do the job .
Greg
#5
Registered User
I got my seal kit from cummins. it had a double lipped seal in it. i put it all the way, as their wasn't much room to do otherwise. it isn't leaking, so now the only leak I have is the blow off tube.
#6
Registered User
Thread Starter
Join Date: Mar 2005
Location: Amherst, WI
Posts: 1,146
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by TRCM
I got my seal kit from cummins. it had a double lipped seal in it. i put it all the way, as their wasn't much room to do otherwise. it isn't leaking, so now the only leak I have is the blow off tube.
#7
Registered User
Join Date: Aug 2004
Location: Va Beach
Posts: 845
Likes: 0
Received 0 Likes
on
0 Posts
Yes it can. Check the TSBs from 94 or 95 I believe. Chrysler added a check valve to keep oil from getting into the vacuum lines. The oil caused vacuum accesories to work intermitantly. I realize that you have a 98 but it will be good food for thaught that may help ya out.
Thread
Thread Starter
Forum
Replies
Last Post
Camarogenius
24 Valve Engine and Drivetrain
5
03-31-2007 09:04 AM
Bobcat698
12 Valve Engine and Drivetrain
5
04-17-2006 01:48 PM