Offset Ball Joints
#1
Registered User
Thread Starter
Join Date: Jun 2006
Location: West Virginia
Posts: 154
Likes: 0
Received 0 Likes
on
0 Posts
Offset Ball Joints
Like the other ball joint thread I would like to know what joints people are getting the best service out off. I am thinking that Moog would be the way to go, but I need to use the offset joints on at least one side and the people that carry moog around here tell me that moog does not make corrective ball joints for the D/60. Is this right.What have you other guys used in this situation. I would like to get on this before it snows.
#3
Check this napa web site http://www.napaonline.com/masterpage...=7&SubCatId=15 This is for a 1997 3500
#4
Registered User
Thread Starter
Join Date: Jun 2006
Location: West Virginia
Posts: 154
Likes: 0
Received 0 Likes
on
0 Posts
Thanks.I haven't seen those before. Has anyone used these? So i'm guessing that if you use these bushings,the ball joint stud must be smaller. Smaller equals weaker to me or is that not right.
Thread
Thread Starter
Forum
Replies
Last Post
firebill1720
3rd Gen Engine and Drivetrain -> 2003-2007
20
03-05-2010 09:23 AM
Seeder
3rd Gen Engine and Drivetrain -> 2003-2007
2
02-15-2006 08:15 PM