MrSlug

I got my SRT10 A pillar and a nice auto meter Boost gauge. The install was fairly straight forward except for two things:

1) Geno's forgot to sent the RTL adapter for the intake..DOH!

2) The nylon tubing got itself kinked as I was pulling it through the firewall. I believe I got it sorted out (more or less straight again) carefully using a set of needle nose pilars. Man I hate that tubing.

I am wondering (while I am awaiting the RTL bolt) if there is better tubing I can use? Is there any way I can test the gauge and tubing before the RTL gets here?

LOL I tried blowing into the tube but the gauge would not budge. He he it was worth a try .

For any who have not done it yet, I highly rec the SRT10 A pillar. It is a snap to install (you have to reuse the plastic tabs, insulation and metal clip off your original A pillar) and looks great.

runamuk

The hose is readily available at the auto parts store as an oil pressure sending unit install kit.

$8.00-10.00 with additional fittings!

Rick

MrSlug

Thanks much! Will go down to Napa and buy a new tube.

Mark1si

Goto a race shop (like Earls) and get a stainless braided hose.

973604x4

ditto on the SRT 10 pillar...love it.

I have a triple dash pod and a SRT 10 pillar...love 'em!