no power help
#1
Registered User
Thread Starter
Join Date: Oct 2006
Location: abilene tx
Posts: 22
Likes: 0
Received 0 Likes
on
0 Posts
no power help
i ground my plate to a 100 and switched the washers around on the afc screwed the star wheel all the way forward and ground a little off the afc arm but the truck still has no power any ideas
#4
Registered User
Join Date: Jul 2006
Location: Central Montana
Posts: 128
Likes: 0
Received 0 Likes
on
0 Posts
Check fuel and air. Clogged air filter? Leaking boost lines (including the intercooler)? Holed diaphram in either the AFC or wastegate actuator? Fuel filters? Fuel shutoff solenoid? Fuel return valve? If your outfit is over 100,000 miles and has a catalytic converter, check that. Heck, check the entire exhaust system for restrictions. Good luck.
#5
hmm.. have you adjusted your gov. arm correctly to your fuel plate?. i am running no plate and star wheel full forward. it smokes like a train.. what kind of washers in afc were you talkin about? like gov. spring washer mod?
#7
Registered User
Thread Starter
Join Date: Oct 2006
Location: abilene tx
Posts: 22
Likes: 0
Received 0 Likes
on
0 Posts
no if you take the washers on the diaframe and switch them my gov. is stock how do you adjust the gov. arm
Trending Topics
#9
Registered User
Thread Starter
Join Date: Oct 2006
Location: abilene tx
Posts: 22
Likes: 0
Received 0 Likes
on
0 Posts
Thread
Thread Starter
Forum
Replies
Last Post
powerwagon440
Performance and Accessories 2nd gen only
3
01-20-2003 08:50 PM
pwabbott
3rd Generation Ram - Non Drivetrain - All Years
14
12-20-2002 08:23 PM