Justin erler

Is it har to modify a newer seat with a center consul that folds down to my first gen it's a 92 le with the normal bench seat and I want the two bucket seats with the center consil that is also a seat

lovin1stgens

heck yes! i got seats from a 94 in my 93. as long as the seat will fit between the doors, she'll go in.
if i was you, i would weld new metal onto the new seat, so you can use the stock holes in the floorboards.
if its a standard cab you wont be able to lay em back, but what else is new lol

enydick

i'd go with 2001 quad cab seats belt built in to seats

DPFservice

I went with the 2000 front seat with built in seat belts and center console. I think I paid $250 at a junk yard. Has drIverside electric controls. Pretty easy to install if you have a welder to make a frame for it.

bryson711

There is a great post in the sticky to show you how to build a frame to put the second gen seats in a first gen, it even has a blueprint to build a frame

thrashingcows

That was my write up..... It was in my crewcab, but should be very similar in a reg or ext cab set-up.

Justin erler

thanks guys..... where would i fiind that post that shows how to build that frame?

The Big Dodge

Watch using the newer 2nd gen seats they require power to release the belts that are built in to the back rest. Its a simple fix to run switched power to release them.

DPFservice

I have the 2000 seats with the seatbelts built in and have power to them not hard to do