new turbos
#1
Registered User
Thread Starter
Join Date: Aug 2007
Location: vancouver canada
Posts: 21
Likes: 0
Received 0 Likes
on
0 Posts
new turbos
I just installed a set of twins and I was wondering what to do with the plug that was for the stock turbo my engine light is on because of it.
#2
Registered User
Join Date: Jan 2006
Location: Indiana
Posts: 3,597
Likes: 0
Received 0 Likes
on
0 Posts
#3
Registered User
Join Date: Jan 2006
Location: Indiana
Posts: 3,597
Likes: 0
Received 0 Likes
on
0 Posts
http://www.industrialinjection.com/id50.html
heres a link to it. you need the one for the wastegate. you should be all set after you get one of these
heres a link to it. you need the one for the wastegate. you should be all set after you get one of these
#4
Registered User
Join Date: Apr 2004
Location: St. Louis
Posts: 1,484
Likes: 0
Received 0 Likes
on
0 Posts
What to do,..
You don't need a boost fooler for that issue. Just remove the sensor from your oem turbo and plug it in. Tie wrap it back out of the way and it will take care of business as is. Your ECM is not getting a proper boost signal with it unplugged as you have it. It will perform much better once you do as directed abv.
#5
Registered User
Join Date: Jun 2005
Location: Nebraska
Posts: 2,452
Likes: 0
Received 0 Likes
on
0 Posts
You don't need a boost fooler for that issue. Just remove the sensor from your oem turbo and plug it in. Tie wrap it back out of the way and it will take care of business as is. Your ECM is not getting a proper boost signal with it unplugged as you have it. It will perform much better once you do as directed abv.
#7
Banned
Join Date: Dec 2005
Location: Twin Falls, Idaho
Posts: 5,194
Likes: 0
Received 0 Likes
on
0 Posts
Worked for me when i had the 5k on.....
You don't need a boost fooler for that issue. Just remove the sensor from your oem turbo and plug it in. Tie wrap it back out of the way and it will take care of business as is. Your ECM is not getting a proper boost signal with it unplugged as you have it. It will perform much better once you do as directed abv.
Trending Topics
#9
Chapter President
Join Date: Apr 2007
Location: misplaced Idahoan stuck in Albuquerque, Roughneckin on RIG 270
Posts: 9,375
Likes: 0
Received 6 Likes
on
4 Posts
ok, can someone explain it to me. if you have the boost sensor plugged in without boost fooler and tie wrapped to the side, won't the pcm throw low boost codes?
I need a boost sensor if anyone has one!! does not have to work, just be complete!
I need a boost sensor if anyone has one!! does not have to work, just be complete!
#10
Registered User
Join Date: Jan 2002
Location: Southern, Indiana
Posts: 5,352
Likes: 0
Received 0 Likes
on
0 Posts
The solenoid we speak of is screwed into the stock turbo compressor housing.
Thats what we are removing and leaving plugged in.
#11
Chapter President
Join Date: Apr 2007
Location: misplaced Idahoan stuck in Albuquerque, Roughneckin on RIG 270
Posts: 9,375
Likes: 0
Received 6 Likes
on
4 Posts
well what the heck does it do then? cause i need one ASAP for a project that I am doing. Need one to put into an old turbo for some mock up stuff. does anyone have one?!?!
#12
Registered User
Join Date: Jan 2002
Location: Southern, Indiana
Posts: 5,352
Likes: 0
Received 0 Likes
on
0 Posts
#13
Chapter President
Join Date: Apr 2007
Location: misplaced Idahoan stuck in Albuquerque, Roughneckin on RIG 270
Posts: 9,375
Likes: 0
Received 6 Likes
on
4 Posts
long story. just need one with the pigtail harness on it. i bought a turbo on here that did not have one and I had to rape the one off my old turbo to use on the new one. have someone interested in my old turbo but will not buy it without the sensor/solenoid. oh, and according to Cummins, you cant buy it without buying the ENTIRE turbo.
#15
Chapter President
Join Date: Apr 2007
Location: misplaced Idahoan stuck in Albuquerque, Roughneckin on RIG 270
Posts: 9,375
Likes: 0
Received 6 Likes
on
4 Posts
the stock one was making noise so I drove by the dealer and they imediatley started talking customer pay because I have gauges. so I bought a turbo from a member here that only had 2100 miles for $400 and it did not have the solenoid on it so I raped the old one off mine but I have a guy that wants it for some project but won't buy it unless it has the solenoid on it. so does anyone have one laying around that wants to get rid of it?
Thread
Thread Starter
Forum
Replies
Last Post
dditt0635004x4
3rd Gen High Performance and Accessories (5.9L Only)
13
02-07-2007 12:36 PM
BigBlackBeast05
3rd Gen High Performance and Accessories (5.9L Only)
1
07-24-2005 09:47 PM
OT-OF-Here
3rd Gen High Performance and Accessories (5.9L Only)
9
10-12-2004 08:11 AM