New Injectors DDP or other suggestions??
#1
Registered User
Thread Starter
Join Date: Sep 2006
Location: Powell River
Posts: 464
Likes: 0
Received 0 Likes
on
0 Posts
New Injectors DDP or other suggestions??
I am running the 75hp ddp injectors now, should have bought the bigger ones instead but... I am going to step up to the 100hp + range injectors, the ddp units are going to be around $1000, any suggestions for an equal quality but less expensive option? Thanks Guys.
#3
Registered User
Join Date: Feb 2008
Location: live oak, ca
Posts: 391
Likes: 0
Received 0 Likes
on
0 Posts
i love the ddp injectors, with the 90's you can make over 500hp with the right set up and shouldnt really affect milage, the 140's will be more power, but probably loose milage and have a lot of smoke, i put down 480hp/1070tq with with the 90's and screwed up wastegates, low boost psi, and smoking like a pig the whole way. here is the vid...
#4
Registered User
Thread Starter
Join Date: Sep 2006
Location: Powell River
Posts: 464
Likes: 0
Received 0 Likes
on
0 Posts
Tate, who deals Sdx in Canada? I may give them a shout and feel them out.
That is a bit of smoke you have there in that video... I also like the ddp injectors dodgetrucker, but they won't even hone my current injectors for much less then the cost of new.
That is a bit of smoke you have there in that video... I also like the ddp injectors dodgetrucker, but they won't even hone my current injectors for much less then the cost of new.
#5
Registered User
Join Date: Jan 2006
Location: Suring, WI
Posts: 63
Likes: 0
Received 0 Likes
on
0 Posts
www.southerndieselx.com there out of Fayetteville, AR.
#7
Registered User
Join Date: Feb 2008
Location: live oak, ca
Posts: 391
Likes: 0
Received 0 Likes
on
0 Posts
brendan, i see you are running 19* timing... how do you like it? what differences have you noticed? i just got my new engine in last weekend, and ended up setting the timing to 19* also, i havent been able to get on it yet, but hope to after this weekend and a head retorque, but i have noticed that it takes longer to start, i dont know if its from the timing or something else...
Trending Topics
#8
Registered User
Thread Starter
Join Date: Sep 2006
Location: Powell River
Posts: 464
Likes: 0
Received 0 Likes
on
0 Posts
That's from the timing! just give it a touch of throttle and should fire on the first crank, that's what mine does. I like the timing, you can hear it down low, but it works well, no complaints. It's hard for me to tell the difference the timing itself made, because I did a bunch of other stuff at the same time, but I assume it's helping!
#9
Registered User
Join Date: Feb 2007
Location: Pasadena, MD
Posts: 1,780
Likes: 0
Received 0 Likes
on
0 Posts
You will start spraying outside the bowl around 18-19* timing with DDP. sdx has the tighter spray angle that will allow you to run more timing. I'm in the 18-19 range and it runs and tows great.
#11
Registered User
Join Date: Feb 2008
Location: live oak, ca
Posts: 391
Likes: 0
Received 0 Likes
on
0 Posts
i know but it was because of the wastegate issues, i had three at the time, and they just wouldnt work on the dyno, i could barly get the trbos to lite at all, and a bad gov adjustment, just kinda hit a wall around 3200
#13
Chapter President
Its just that the last dyno run I was on it was like pulling out to pass on a hill. The pyro was buried long before I got to full rpm and probably took a good 15-30 seconds. Doesn't sound like much time, but when the pyro is on the peg it seems like forever..
#14
Registered User
Join Date: Aug 2005
Location: Airdrie, Alberta
Posts: 7,780
Likes: 0
Received 0 Likes
on
0 Posts
#15
The Guru
Join Date: Jan 2004
Location: Airdrie Canada
Posts: 6,589
Likes: 0
Received 0 Likes
on
0 Posts
Bredan, I can help you out with the border if you want. I second the STX injectors, they seem to pretty good guys to deal with. I would work the P pump some more so you can get some fuel, prior to spending money. Have you bench the pump? You actually getting fuel at the higher rpm's? How well is the AFC set-up? Which pump you running? That amount of fuel rating for 500rpm or 1000rpm? 430cc, seems low for a worked pump.