New guy with questions
01-20-2008, 10:44 AM
#1
Registered User
Thread Starter
Join Date: Jan 2008
Posts: 15
Likes: 0
Received 0 Likes
on
0 Posts
New guy with questions
Good morning all, I'm new to this forum and this is my first post.
I have a 93 engine and what was suppossed to be a 47RH (lock up) trans. I plan to install this in an old (much modified) 55 Ford cab over truck. By trial and error, I now have the trans installed on the engine. (Had to replace the trans adaptor, flexplate and starter.) After going through all of that, I just noticed the main electrical connector in the trans has eight pins. Am I correct in assumming it is a 47RE trans and not an RH? If so, now what???
Are there any stand alone trans controllers? Has anyone here had any experience with them?
Many thanks for any insight, advice or suggestions.
Grammabud
I have a 93 engine and what was suppossed to be a 47RH (lock up) trans. I plan to install this in an old (much modified) 55 Ford cab over truck. By trial and error, I now have the trans installed on the engine. (Had to replace the trans adaptor, flexplate and starter.) After going through all of that, I just noticed the main electrical connector in the trans has eight pins. Am I correct in assumming it is a 47RE trans and not an RH? If so, now what???
Are there any stand alone trans controllers? Has anyone here had any experience with them?
Many thanks for any insight, advice or suggestions.
Grammabud
Thread
Thread Starter
Forum
Replies
Last Post
tinker
3rd Gen High Performance and Accessories (5.9L Only)
1
11-26-2007 08:20 PM
rjm022
Performance and Accessories 2nd gen only
0
09-16-2007 08:33 PM
Hummin Cummins
3rd Generation Ram - Non Drivetrain - All Years
9
11-16-2002 11:22 PM
