new to the forum, need help
#1
Registered User
Thread Starter
Join Date: Jan 2007
Location: south east Pa.
Posts: 37
Likes: 0
Received 0 Likes
on
0 Posts
new to the forum, need help
im new to the forum, i just bought a 1999 CTD and the center console arm rest is in the up position and wont fold down, Is there a trick or secret latch that i cant find to release it to the down postion??
#2
Registered User
I've been in quite a few Rams from 94 on up and never knew of a catch for the center console. Run the seats all the way forward and look at the mounting hardware on the bottom sides of the center arm rest to see if there is a catch or are screwed shut or something.
#4
Registered User
Join Date: Apr 2004
Location: St.Paul , MN
Posts: 732
Likes: 0
Received 0 Likes
on
0 Posts
Make sure there is nothing caught under it so it folds down all the way. May have to shake it a little. I think there is a "tilt" mechanism in it. Mine won't open unless it is almost flat.
Hey gizzsy fill out your signature in the user cp above.
Hey gizzsy fill out your signature in the user cp above.
#5
Registered User
Join Date: Jan 2007
Location: Anchorage, AK
Posts: 423
Likes: 0
Received 0 Likes
on
0 Posts
not sure I ever heard of it being a problem not folding down. usually it has a problem staying in the upright position Possibly whoever owned it before you tightened the screws so it would no longer swing freely. you might check to see if its screwed on too tight
Thread
Thread Starter
Forum
Replies
Last Post
newdieselguy
4th Gen Engine and Drivetrain-2010 and Up
6
04-01-2014 12:41 PM
brickman
3rd Gen High Performance and Accessories (5.9L Only)
1
05-29-2011 08:46 PM
Lightman
Suggestions, Comments and Site Questions
12
11-02-2005 06:31 PM