Need some front Dif help.
#1
DTR Detective
Thread Starter
Need some front Dif help.
The Breather tube has come free at the end that's away from the dif.
I see a plastic clip on the frame that the hose goes in, but I can't find where the metal clip on the hose attaches further up and lastly the end of the hose has what appears to a white plastic coupling that I also can't figure out where it goes.
I see a plastic clip on the frame that the hose goes in, but I can't find where the metal clip on the hose attaches further up and lastly the end of the hose has what appears to a white plastic coupling that I also can't figure out where it goes.
#3
Registered User
Join Date: Aug 2005
Location: Minnesota
Posts: 1,303
Likes: 0
Received 0 Likes
on
0 Posts
The metal clip probably fell off the hose, the "coupling" at the end of the hose is the breather vent. It just's there to vent excess pressure.
My hose came loose, I just zip-tied it back up. Make sure the vent isn't plugged full of dirt.
My hose came loose, I just zip-tied it back up. Make sure the vent isn't plugged full of dirt.
#6
DTR Detective
Thread Starter
it's a couple-few inches below the vent end...I attached it to my shock tower for now, but it's touching the steering shaft so it'll need to be moved when I get home.
Trending Topics
Thread
Thread Starter
Forum
Replies
Last Post
donsharp1959
1st Gen. Ram - All Topics
6
12-15-2011 12:40 PM
MX429
3rd Gen High Performance and Accessories (5.9L Only)
5
06-17-2009 11:50 AM
pwrtripls1
1st Gen. Ram - All Topics
8
06-02-2005 01:46 PM