Crimedog

Hey guys, can some of you with 2" spacers up front, or even the D25 coils give me a measurement? I need it to be from the top of the lower coil mount, to the bottom of the upper coil mount. Or, if you could go somewhere on the top of the axle housing to the frame, that would work, too. I finally got some money, and am trying to decide if I need the 2" kit or not to fit some 35's. I already swapped in the stiffest springs from Dodge, the 047/048 combo, for the plow, and it added about 1.25" of lift, so the truck just about sits level right now.

THANKS!

59Dsul

I've got the D25's:
I measured from the top of the bottom mount to the bottom of the top mount at the point closest to the tires. Mine measure right at 15". The driver's side was an even 15" and the passenger side was 14 7/8". Hopefully that was what you were looking for.
andy