need measurement between bump stop & bump stop platform
#1
Registered User
Thread Starter
need measurement between bump stop & bump stop platform
The rear of my truck is sitting low because of the extra weight, and I'm working on raising the rear of my truck back to factory height (thread HERE). Could I get a measurement between the factory 3" bump stop and the bump stop platform on the factory 4 5/8" spring block? The distance between the bump stop and the platform on my truck is only 2 1/2".
#4
Registered User
Well it was gone when I first posted, then it was back, now it's gone again. I'll check it before it gets out of the yard tomorrow and repost the results.
#5
Registered User
Thread Starter
I don't mean to be too much trouble, but could you also measure your bumpstop height and the height of the blocks too. I want to make sure that nothing has been changed from how it is supposed to be. Thanks.
#7
Registered User
The height of the spring block on my 1997 is 4 5/8". The bumpstop height is 3.5" but has an empty horse trailer hooked to it now. I would guess it would be close to 5" without the trailer.
Trending Topics
Thread
Thread Starter
Forum
Replies
Last Post
RAW
3rd Generation Ram - Non Drivetrain - All Years
1
03-11-2005 02:44 PM
supercharger
Performance and Accessories 2nd gen only
0
04-02-2003 05:20 PM