I need help wiring my "modulite"
#1
I need help wiring my "modulite"
I can't figure out which wires are which, I pulled the loom back up by the tail lights to figure out where to splice into for my stop/turn/brake lights input and on both sides there is nothing but white/green, white/light green, green/white, and i forget what the last one was I think black. I don't know where to tap in for vehicle input since both sides are the same and for the brake light can I just use one side for the brake or do I have a wire from both sides for that as well? I hope this all make sense and need some help I have used my manual and all it gives me is the same colors that go directly to the wire harness that don't work I don't know where to splice and need some help Fast!
#2
okay maybe to clarify a little, I need to splice in up by the plug that plugs into the tail light assembly. I can tell which whire that goes into the assembly is for the stop/turn lights if I know which one is which I can figure it out from there im pretty sure. I traced the wires back hoping to find the seven pin harness spliced into the turn signal wires but I don't think it's that simple and maybe im making it too complicated. any help would be appreciated.
#3
Registered User
Join Date: Jun 2005
Location: Mid-Missouri
Posts: 324
Likes: 0
Received 0 Likes
on
0 Posts
Try reading over this one, it has pictures and may help you solve your problem, keep us updated because I am having the same issue with mine now.
https://www.dieseltruckresource.com/...light=modulite
https://www.dieseltruckresource.com/...light=modulite
Thread
Thread Starter
Forum
Replies
Last Post
SOhappy
3rd Generation Ram - Non Drivetrain - All Years
38
08-20-2015 07:36 AM
rconkin
3rd Generation Ram - Non Drivetrain - All Years
5
07-18-2010 09:32 PM
marktaco
3rd Generation Ram - Non Drivetrain - All Years
4
06-01-2010 08:44 PM
greenone
3rd Generation Ram - Non Drivetrain - All Years
3
09-08-2009 01:18 PM