HappyGA

I have the K&N FIPK witht he cone filter for an 03 model 2500, I want to put an oiless air filter in it's place, so the connecting side of the air filter needs to be the same as the K&N soi I can use the tub to the turbo. Anyone know what filter I need?

I am thinking A&M, but will it interchange with the K&N??

John Faughn

I think that the new Amsoil EAA filters are the best right now , There's enough verity that you should find what you need .
This is who I have been getting mine from , about $ 50 , put a cone on mine at the last dyno gathering , switched from a BHAF , made a air box out of the plastic cardboard , same color blue as the filter , when it gets warm out I'll use the blue silly cone to glue the edges together .



http://www.lubedealer.com/twinportsales/home.aspx
Twin Port Sales - Amsoil Shipped Direct

53 willys

whats the part number on your K&N filter (just the filter part number)

if you know that I can tell what amsoil dry filter would fit.

HappyGA

it will be after work before I can get it, and I will be home by then, I willpost in the morning. Thanks 53

53 willys

here it is I found it on the K&N site....
Amsoil Part#EaAU4095

HappyGA

thanks a lot...

jrussell

Hey 53 *****'s, do you also happen to know the Amsoil part # for an oil-less replacement for the AFE?

John Faughn

Hoss is got a thread going on this also , he's got an 03 , if my memory is on , and the Amsoil , for a drop in [ origanal air box ] was EAA189 , but check before you but , I left a link above .

53 willys

It is the same as my intake filter! That I run....
1 amsoil cone filter part#EAAU6080 6"inlet

jrussell

Awesome, thanks!