Russ Roth

Anybody in the Vancouver, WA area have a code reader I could get my codes read with? My rig is DOA at home and I can't get it anywhere to get the codes checked. Pretty sure it is the IP but don't want to just throw $$$ at it just for fun. I get no codes with the key trick except the 1693. I only got that after I unhooked the electrical connection to the pump to make sure it was getting power.

I live off SR500 near the Green Mountain golf course. TIA for any help.

johnh

do you get any fuel to the injectors? if not your IP is bad.... codes will be 1693,1688 and 1689

dodgezilla04

ross, wish i was closer, i would love to help you... sorry dude. i know they sell them at autozone and schucks...

OR BUY a smarty!! its reads/clears codes, and adds fun value when its running.

Russ Roth

Just a very insignificant trickle after a lot of cranking. Pretty sure the IP is dead. Just want to check every possible angle before I spring for a lotta $$$.

robert78.5

Did you try the ignition key turn on and off three times to get codes?

Bob Wagner

call Bill at Source. Bill lives in Vancouver 866 211 1533

johnh

that's the way mine went, but i was able to get the codes with a friends smarty to confirm it ... we tried to start it with starting fluid, it would run for a short time......so we trailered it to industrial injection (about 15 miles) and replaced it, no problems since

Russ Roth

I met Bill last summer and in fact he answered the phone when I called Source. He didn't have anything to read codes for a 2nd Gen. Thanks.