need advice
#1
Registered User
Thread Starter
need advice
I have been running a Isspro mech fuel press gauge for 1-1/2 years
needle rock steady, hooked Fass unit to vp44 and now needle is
pulsating real bad suppose the old grease gun hose will work?
Any one with the Fass run in to this?
needle rock steady, hooked Fass unit to vp44 and now needle is
pulsating real bad suppose the old grease gun hose will work?
Any one with the Fass run in to this?
#2
Administrator
Re: need advice
Originally posted by Olratlr
I have been running a Isspro mech fuel press gauge for 1-1/2 years
needle rock steady, hooked Fass unit to vp44 and now needle is
pulsating real bad suppose the old grease gun hose will work?
Any one with the Fass run in to this?
I have been running a Isspro mech fuel press gauge for 1-1/2 years
needle rock steady, hooked Fass unit to vp44 and now needle is
pulsating real bad suppose the old grease gun hose will work?
Any one with the Fass run in to this?
Just close it down all the way, then open it little by little till the guage reads normally.
(thanks to Shovelhead for the pic)
phox
#4
Registered User
I had a hard time finding a 1/8" needle valve, I went to my local TrueValue hardware store, kind of a small Mom&Pop store and they gladly ordered me one.
Thread
Thread Starter
Forum
Replies
Last Post
dodgemaniac
Competition / Pulls / OffRoad
12
07-31-2008 10:15 AM
ryan466
3rd Generation Ram - Non Drivetrain - All Years
3
08-30-2006 10:10 AM
v8440
2nd Gen. Dodge Ram - No Drivetrain
14
09-07-2005 08:39 PM
olchevrepl
2nd Gen. Dodge Ram - No Drivetrain
20
10-29-2002 08:14 PM