how much pressure @ the rail
#1
Registered User
Thread Starter
Join Date: Jan 2007
Location: Home of the Beaver
Posts: 685
Likes: 0
Received 0 Likes
on
0 Posts
how much pressure @ the rail
running the Dr P 2018 pressure box--110hp progressive. Pressure comes on with minimal boost.
My rail gauge maxes out at 25-26k, this in relation to the sensor max parameters.
Without the pressure box the rail is 23-25k depending on load.
Is there a aftermarket pressure sensor to read higher than the factory sensor?
I cannot call Dr P from Canada. Does anyone know what the actual max pressure would be?
onetun
My rail gauge maxes out at 25-26k, this in relation to the sensor max parameters.
Without the pressure box the rail is 23-25k depending on load.
Is there a aftermarket pressure sensor to read higher than the factory sensor?
I cannot call Dr P from Canada. Does anyone know what the actual max pressure would be?
onetun
#6
Registered User
Join Date: Jun 2005
Location: Nebraska
Posts: 2,452
Likes: 0
Received 0 Likes
on
0 Posts
running the Dr P 2018 pressure box--110hp progressive. Pressure comes on with minimal boost.
My rail gauge maxes out at 25-26k, this in relation to the sensor max parameters.
Without the pressure box the rail is 23-25k depending on load.
Is there a aftermarket pressure sensor to read higher than the factory sensor?
I cannot call Dr P from Canada. Does anyone know what the actual max pressure would be?
onetun
My rail gauge maxes out at 25-26k, this in relation to the sensor max parameters.
Without the pressure box the rail is 23-25k depending on load.
Is there a aftermarket pressure sensor to read higher than the factory sensor?
I cannot call Dr P from Canada. Does anyone know what the actual max pressure would be?
onetun
Trending Topics
#12
#13
Registered User
Thread Starter
Join Date: Jan 2007
Location: Home of the Beaver
Posts: 685
Likes: 0
Received 0 Likes
on
0 Posts
OK guys thanks....however my point is still in question.
I run dual pumps, with a pressure box I can bury the needle on the rail gauge with zero fluctuation. Perhaps my pressure is 35k who knows.
Since the rail sensor reads max @ 27500-28000 I will never know.
Anyone know how much pressure Dr P adds....3k-5k-6k-7k-15k
onetun
I run dual pumps, with a pressure box I can bury the needle on the rail gauge with zero fluctuation. Perhaps my pressure is 35k who knows.
Since the rail sensor reads max @ 27500-28000 I will never know.
Anyone know how much pressure Dr P adds....3k-5k-6k-7k-15k
onetun
Thread
Thread Starter
Forum
Replies
Last Post
LooseBoltsRob
3rd Gen High Performance and Accessories (5.9L Only)
33
02-07-2010 12:43 PM
incognyto
3rd Gen Engine and Drivetrain -> 2003-2007
12
11-22-2008 01:27 PM
SMOKIN-U
3rd Gen High Performance and Accessories (5.9L Only)
13
09-09-2008 06:58 PM
5.9Excursion
3rd Gen High Performance and Accessories (5.9L Only)
3
03-13-2008 10:56 AM
DMS1707
3rd Gen High Performance and Accessories (5.9L Only)
12
04-09-2007 10:31 PM