Do you think they would believe that is Newcastle in a Mason jar?

That seems kinda strange, keeping anti-freeze in the freezer.[duhhh]

I don' think it will keep, even in the freezer.
We need to finish it off before it goes bad!

It's bad when it won't burn, right?

Well if its bad when it dont burn, this stuff ought to be good for at least 20 years with all the burn its got. It has a almost sweet smell with a little burn in it. But man when you taste it, whew whee, Its so smooth going down but as the song says, "burns your tummy dont you know, chugalug chugalug" :o :cool:

I wonder how it would work as a diesel fuel additive?

mine still burns! WOW!!!!

What's this???????? I'm away for just a few hours and you guys start this thread up again? [laugh] [laugh] [laugh] Why it seem we're allways talking bout thishttp://www.colorado4x4.org/vbb/images/smilies/co4x4/drunk.gif If people got on here and didn't read into the thread very much I think they would assume we were all just a bunch of drunks..............well, uhhhhhhh maybe we uhhhhhhhhh, what were we talking about.................?????????????http://www.colorado4x4.org/vbb/images/smilies/hail.gif http://www.colorado4x4.org/vbb/images/smilies/co4x4/beer.gif

...what were we talking about.................?????????????

Newcastle!

I think DmaxEter's truck runs on the stuff.

The following errors occurred when this message was submitted:
Sorry! The administrator has specified that users can only post one message every 60 seconds.



... wait 59 seconds try again.
Take another drink while I wait. Yeah, that's it! [coffee]

Long enough yet?[whistle]

Yeh, I've had the same thing screamed in my ear a few times also.

Huh, Did some one say New Castle?

Here we go again!!!!!

Maybe we should have a code name for Newcastle? So it's not as obvious?
Almost 1 week over, one week to go until my truck is back.....I can make it...... [eyecrazy] [eyecrazy]

Y'all wake up now.
Smell the coffee, bacon, eggs, grits and home-made biscuts.

Oh yeah, I think there is still a Newcastle in the fridge!

I'm going to bed!

Were he helll you at? You sneekin' up on me? Thats exactly what i fixed for bfast here on the boat this morning. You missed the fried corn beef hash w/eggs and suasage gravy though.

What's this???????? I'm away for just a few hours and you guys start this thread up again? [laugh] [laugh] [laugh] Why it seem we're allways talking bout thishttp://www.colorado4x4.org/vbb/images/smilies/co4x4/drunk.gif If people got on here and didn't read into the thread very much I think they would assume we were all just a bunch of drunks..............well, uhhhhhhh maybe we uhhhhhhhhh, what were we talking about.................?????????????http://www.colorado4x4.org/vbb/images/smilies/hail.gif http://www.colorado4x4.org/vbb/images/smilies/co4x4/beer.gifSorry, I was getting a cold one out of the fridge. Did you say something?

Were he helll you at? You sneekin' up on me? Thats exactly what i fixed for bfast here on the boat this morning. You missed the fried corn beef hash w/eggs and suasage gravy though.Such language, shame on you! Breakfast sounds good but I'm ready for some more upside down pizza.[laugh]

Hey T-Rad, come on over to the dyno day and if we have time I'll tret ya'll to some of that again.

Some one say new castle again?

No, we said PIZZA! Pizza Pizza Pizza Pizza Pizza Pizza Pizza Pizza Pizza Pizza Pizza

Hey y'all, somebody hold my beer and WATCH THIS:

Newcastle Pizza Newcastle Pizza Newcastle Pizza
Newcastle Newcastle Newcastle Newcastle Newcastle
[coffee]
Watch out, here he comes!

Dmax, people gonna think your MSDTR's town drunk!! [laugh] [laugh] [laugh] Clear your mind.....we need a board dedicated to New......nope, I'm not gonna say it....thinking it, but resist.....don't go to my fingers...no,...NOOOOOOOO!!!!!

Hey y'all, somebody hold my beer and WATCH THIS:

Newcastle Pizza Newcastle Pizza Newcastle Pizza
Newcastle Newcastle Newcastle Newcastle Newcastle
[coffee]
Watch out, here he comes!BUURRRRRP[laugh]

Some one DID say new castle!!!! Pass me one!! :cool:

Dang, he's predictable! [laugh]

He must have a sixth sense, an alarm goes off in his head when that word is put onto this page....can you pick lottery numbers Dmax?? [laugh] [laugh]

Ya reckon?

How long does it take?


NEWCASTLE!

[coffee]

he must be sick Prospector, it has taken him an awful long time to show up?? :confused: :confused:

Ahh don't worry, wont be long now. He gets off work @4pm so should be soon.

I thought I heard New Castle again??????

Where are they at????

Hey Dmax, I hate you!!!!! Go to the 3rd Gen Perf. forum and you'll see why.


I WAS DONE, I WAS DONE, I WAS DONE!!!!!!!!


Damnn you, damnn you to hell you spawn of Satan [verymad] [verymad] [verymad]











[laugh] [laugh] [laugh] [laugh] [laugh]

HAHAHAHAHA You of all people should know your never DONE with these things!!!!!!!



PS, I got tired of the internet new castle to kick in so I went to the store and got my own. MMMMMMMMMMM good!!

You know, ALCOHOLICS drink alone.

Im not alone! Ralphs here with me ;)

But is Ralph drinking with you?

Ok before you get to far gone watch this vid. Found it over at putfile, the videos you can find over there just by wandering around.....

http://media.putfile.com/Big-Gun-74

Thought you guys would get a kick out of this, posted it over in the "other" section, but wanted to bring it personally to my friends! LMAO over this everytime I watch....glad he's alright!

LOL
I bet he is still humming the tune "What was I thinkin".

Dmax, don't drink alone! I'm headed over to Beale St now .. "Silkys".
I'll be in my usual spot at Silky's table on the sidewalk in front of the door.
I just might drink a Newcastle or 2 for ya.

[coffee] [coffee]

I have had enough new castles for a couple of people my self!!!


The mods must not monitor this post too awful close. They were quick to shut that link down in the others forum but its still here. I wonder how long it will take???????

I got a couple pictures of that gun. There are only two like it in the world as they were had made by I believe a gunsmith in some other country.

I still want me a 1911 chambered in 50cal!!!!

You missed a good time. Had a lot of "Idols" sing for us.
Silky invited a lot of them to come back tomorrow night (er, TONIGHT) for an "Idols Gone Wild on Beale St". Now that ought to be fun! :D

That Newcastle was pretty good too. [coffee]

Man, I always miss out on the good fum when I'm on the boat.

gotta find me some Newcastle....http://www.freesmileys.org/emo/think005.gif (http://www.freesmileys.org)
It's like the movie Harold and Kumar go to White Castle......they got those little burgers in there minds....got Shawn trying to find a Newcastle now....http://www.freesmileys.org/emo/eatdrink009.gif (http://www.freesmileys.org)

http://www.dieseltruckresource.com/pics/data/500/medium/P_s_Pics_139.jpg

Nice photo - no caption?
Wazzup?
Where's da NewCastle? Still studying the pic, looking for it!

Hey guys, Dmax sorta knows allready, but I'm working several different angles right now to grow our little club. We may be getting some sponsorship deals going with Hypertech. Please stand by.

Anything that comes out of this can only be good. There will def. be some rewards to those who've been with us since the beginning and who are active members before any kind of deal I can work out.

Kewl!
[coffee]

Yeh, they don't have much in the diesel market, but they are a hometown company based right here in Memphis, and their lead engineer has contacted me and says they are wanting to grow this segment cause they have been left out of it as the other newer companies have offered better products. He said they are in the process of fixing this little problem. He wouldn't say for sure, but something along the line of consolidation or partnering with a diesel performance specific company. A la MSD's buyout of Edge.

Hey slowpoker, I missed like three calls from you yesterday, sorry. I was working on the pulling tractor with my friend and left my phone at home. Then when I did get home I spent most of the night breaking down a tire to get the tube out. Fellas, Im hear to tell you a 18.4X26 tractor tire is big to be manhandling by yourself!:o But I got it!!!!!

Call Me Slowsmoker and I will answer.

Sooner or later, we gotta finish (or pause) working on other people's stuff and do something on Cummins-Powered Dodge trucks!

I just found out what a pain in the arse it can be to "simply" change the transmission belt on a John Deer riding lawn mower. I'm sure glad I don't own one of those!

Now I'm tracking down problems with the power winders on Silky Sullivan's Rolls Royce. This may take a few more days. :(

Meanwhile, my new FUEL PRESSURE GAUGE should be sitting at my door when I wake up tomorrow, and the Energy Suspension's polyurethane control-arm bushings are supposed to arrive the next day. :)

I think I'm gonna have to party less and work more this weekend.
[coffee]

Ah, Prospector, I see you're interested in the Smarty aren't you?

Dmax is doing everything he can to keep me from finishing this thing. I'm telling you he's the devil!!!!! stay away from him if you value your savings.

Propane, Nitrous, Water/Meth, a cam shaft, a better transmission, edge ez for myself,performance CP3, slicks, ditch the 62 turbo for TWO turbos, man I can keep spending it as you keep making it!:cool:

Somebody wake him up, and hand him a fresh Newcastle.
Da boy dun fergot he got married!

Hey Patric, got a guy here wants just $250 for a excelent used one or yah!!!

Wow, I missed out on all the chit chat. Guess I'm odd guy out this time. I've been on vacation this week. Been down in the shop working on my cab gaurd/protector...thing. Boy, it just keeps getting heavier and heavier, almost done then I have to paint...oh boy!!

That headache rack looks awesome Dodgeguy. I may need one of those. It'll match my front bumper. You'll see what I mean on the 16th. Are those going to be solid panels on the inside?

The panels on the inside is actually one panel. I figured this would raise questions as for visibility out the rear. It is filled with tons of little holes, I'm thinking each hole is about as big as the tube that holds the ink on those cheap bic pens, maybe a bit larger. You can see out it and it will serve it's purpose of protecting my window, pretty sturdy stuff. I held it up looking out of the shop into the driveway and it's good, after a minute or so your eyes start to [eyecrazy] [eyecrazy] But just for glancing behind me to see the next idiot that is gonna hit my truck, it'll work great.

I could fix you up, yours is an 01' the measurments should be about the same. Do you have a toolbox? That is the wrench in my gears right now. I have an idea on a simple way to mount it, but....I like the feeling that is gonna be strong, not...it should be ok, know what I mean. [laugh] :D

Wow, that is nice! Good job!

[coffee]

Huh, New castle, where, cold, I can drink more.

And did I hear mention of an edge ez

Got one with your name on it at my shop.
[coffee]

Alright guys, still trying for the 16th. Streetsmoker is going to be jealous, torque tube is on the way. ooooooo:eek:

Hey Dmax, the guy who has the Edge EZ for $250 needs to know if you want it or not?

Sucked tonight at the track in Atlanta, Only got 1 run in with everything cranked. Spun the 1st 100+ feet before finally grabbing traction, Still posted a 14.68@104.9mph.

Who has it and where is he? The EZ that is and is it for an 04.5+

anybody here?????????

nnnnnneeewwwwww caaaassstttlllllllleeeeee

Huh, new castle, Im here.

Streetsmoker is whooping up on all them other so called diesels at the atlanta GA races. Last update from him about an hour ago it was down to him and one other. Hes at least gonna place second.


GOOD JOB STREETSMOKER.
If I had some pom poms I would cheer for you!

The possum police is going to be calling on you guys. You know it's illegal to hunt in a baited field. Newcastle laying around everywhere. What were you guys thinking?

Point me to it, i'll pick it up!!

GOOD JOB STREETSMOKER.
If I had some pom poms I would cheer for you!If you can't shake some pom poms the least you can do is rattle some empties!!![laugh]

Dmax, what kind of times is he laying down?

Just got word, he broke out on the last race and placed second.

This was bracket racing and he was not running with all his stuff on. He had the edge set to de-fuel to try and run more consistant and it seemed to work. He was running 13.0's give or take a few hundreths.

Good job streetsmoker. Were proud of you. [roll] :cool: [guitar]

RATTLE[roll]RATTLE[roll]RATTLE[roll]RATTLE[roll]RATTLE[roll]RATTLE[roll]

I'm here, the 1st looser!!! Last run went like this relize, as soon as I saw my red light I just did a 50ft burnout, got out of it then did a 3/4 thrtl run:

Me: 13.05 Dial In Other Guy:13.15 Dial
RT/ -.008 RT/ .130
60'- 2.169 60'- 1.9
13.526@104.39mph 13.142@102.69



Everyone know what I run, the guy I ran in the finals name is BillyRam. Running an '04.5 QC SWB 4x4 TST, VA 3.1. My Best et. all night was 13.001@104.7mph.

Alright guys, theres an upcoming truck and antique tractor pull at Burtons surgar farms thins month that I will be attending hopefully with the JD50. Me and my tractor pulling friend plan to have it ready but I dont think we will make the 4500lb class this year. We got to get rid of those cast iron wheels and that stupid rock shaft[verymad]

I will most likely be competing in the street diesel class so anyone that would like to attend just give me a shout and I will see to it that you get there. heres a link to their place. check out the whole place, its great fun for the family and a real learning experience.

http://www.burtonsugarfarm.com/truckpull.htm

Hey Dmax, where is that at and when? I did not see any dates on there. Don't know if I could make it.....but I might be able to talk myself into it.

Good job in hotlanta Streetsmoker!!!

Ok, answered my own question...just have to look [duhhh] [duhhh] October 7th I'll be in Campbellsville at a truck/tractor pull....gonna try and drum up somemore members :D

Where's all this diesel racing going on at??

Welcome FD5, Where are you at and maybe we can find you a race[guitar]

Madison, just north of Jackson.

We have three truck pulls coming up. Sept. Oct. and Nov. Anyone intrested just let me know.

FD5, Im in Olive Branch MS. We got guys all over the midsouth from nashville to LaPlace LA. that attend the meets, just keep watching this post to find out when the next meeting is and when the next racing or pulling event is. As it stands now, we are gonna have a dyno day next weekend in tupelo MS. Think you can make it?

Dmax, I might make that pull a sugar farms this month but that would be the only one I might could make. We missed the pull in Dyersburg and the resceduled one in Covington is on Oct. 14 but I won't be able to go. I'll let you know.

Congrats streetsmoker,

So did you get anything for second?

Dmax,
Appreciate the invite but I will be in Dallas.

Covington? Now ya got my attention!

I couldn't find much on the internet about it - even though I thought I book-marked the page after the last one I MISSED.

Tipton County Bar-B-Cue Festival & Heritage Festival

Cobb Parr Park - Includes barbecue cookoff, demolition derby, truck pull, music and more. The Heritage Festival will be held Oct. 14 with tours of the courthouse and historic homes.

2nd place payout was $150. 1st would have been $500.

I got some decent vids of streetsmoker over there in atlanta. Thought we lost them though, but he just got word that his camera was turned in at the track.[guitar] I put mine on the dyno and pulled 312hp and 675tq. I was so happy I got over 300 with just my juice and veggy oil.[roll]

Thats a fine dyno number there wrglrroper. Nothing to be ashamed of there. Heck, you might even have me beat with my 3rd gen. now, time for me to unleash the brain washing, just ask Streesmoker. If you made that kind of number with just the edge box, imagine what a little bit of propane, a torque converter and valve body, maybe some nitrous, a little bit of timing and some more fuel would do? The possabilitys are endless and easy. Just takes a little bit of money. [whistle]

Tell him how it works Streetsmoker!!!!:cool:

Im Goin To Try And Stop By One Night This Week , To Talk About Us Meetin Up And Headin Down To Toupelo

Come on by. I wont be around the 13th, and I will be late the 14th, but im here any other day about 5 or 5:30ish.

Yeah Dmax money is the key ingrediant that seems hard to come by for me.:(
But i will get more done down the road. Right now I am concentrating on my 64 chevy truck. I want to get it on the road instead of sitting in my drive way. There is actually rust stains on the concrete from where it has been there so long.[tapdshut]

312hp and 675tq. I was so happy I got over 300 with just my juice and veggy oil.[roll]312/675 on veggie juice,[duhhh]dang , I could have had a V8. O.K., seriously, that's cool.:cool: Makes me want to plant a garden! Got to give you the #31 sa-lute,
RATTLE[roll]RATTLE[roll]RATTLE[roll]RATTLE[roll]RATTLE[roll]RATTLE

A couple of days ago I noticed that I only have ONE Newcastle left in the fridge at my shop - I was saving it for Dmax...

Today I was a Wally-world and figured I'd pick up some more; but they don't have Newcastle! (at least, not at the Millington store).

I may have to add that to the endangered species list.

[coffee]

New Castle, none left, say its not so? :(

New Castle, none left, say its not so? :(D-Max, you killed them all.:(

There is one at my shop. Life-expectancy .... um, SHORT!

I thought I bought it at Wally-world last time, but I could be wrong.
I'll look for it next time I'm on the Navy base.

nice numbers wrglrroper!! See what you need to do now, as I have been searching myself on another thread I posted. Go with some jammer DD3's(100hp injectors), pdr hx40 and your box. I was thinking about this setup plus smarty and should get upwards of 400hp!! Now all I need is around $2700 to get me started!! :o :o ams for the poor! ams for the poor! Don't even know about the ams stuff? Heard it in a movie[laugh] Donations are welcome in all denominations, prefer small unmarked bills [laugh] [laugh]

:o :o ams for the poor! ams for the poor! Don't even know about the ams stuff? Heard it in a movie[laugh] Donations are welcome in all denominations, prefer small unmarked bills [laugh] [laugh]
Maybe "History of the world, Part One":)

Speaking of un-marked bills, those are getting kind of rare.

I find it kind of insulting when I go to the store and when I pay for my stuff, they test it with one of those counterfiet marking pens. They don't even know me, but think I might be a crook? [verymad]

I'm tempted to buy my own pen, and check every bill they hand me in my change. [nonono]

[coffee]

Get'em Prospector. I never thought of doing that. I would like to get one of those pens to. Let me know where you find one at!![laugh]

Meanwhile, next time they check your $20, ask to borrow THEIR pen and check all the $1's, $5's and the $10 in your change. [dummy]


[coffee]

ams for the poor! ams for the poor! Don't even know about the ams stuff? Heard it in a movie[laugh] Donations are welcome in all denominations, prefer small unmarked bills [laugh] [laugh]

Alms (http://en.wikipedia.org/wiki/Alms)- (Wilkipedia) more than you probably want to know; but the common conception (extracted from that article) is:

...in general terms, it is obligatory to give away 2.5% of ones savings and business revenue, as well as 5-10% of ones harvest, to the poor. The recipients include the destitute (http://en.wikipedia.org/wiki/Destitution), the working poor (http://en.wikipedia.org/wiki/Working_poor), those who are unable to pay off their own debts, stranded travelers, and others who need assistance,...

New Catholic Dictionary: alms (http://www.catholic-forum.com/SAINTS/ncd00352.htm) -
(Greek: eleemosyne, compassionateness)

Material help given to the needy, prompted by Divine charity.


Google search (results) for "Alms for the poor" history (http://www.google.com/search?hl=en&lr=lang_en&rls=HPIA%2CHPIA%3A2005-42%2CHPIA%3Aen&q=%22Alms+for+the+poor%22+history&btnG=Search)


[coffee]

Who's going to the Tipton Couny BBQ Festival (http://www.covington-tiptoncochamber.com/lifeintiptoncounty/events.php) in Oct?
I haven't found a lot of details other than these 2 links. http://www.turbodieselregister.com/ubb/frown.gif



Events for this festival include Memphis in May sanctioned bar-b-que cooking contest, a demolition derby, arts and crafts exhibits, a truck pull, live bands and many other fun activities



Tipton County Bar-B-Cue Festival & Heritage Festival (http://www.tnvacation.com/events/1789/)


Event Dates
Oct 12, 2006 - Oct 14, 2006
Quote:


Cobb Parr Park - Includes barbecue cookoff, demolition derby, truck pull, music and more. The Heritage Festival will be held Oct. 14 with tours of the courthouse and historic homes.



Hmmm. I'd like to go, BUT: I'll be just-got-back (Oct 11) from AIRSHO 2006 (http://www.airsho.org/) at Midland, TX. My wife might object; or she MIGHT even want to go with me.

__________________

Prospector, I'd like to go but I won't be in town. If you want links about the pull. www.hillsled.com/ is the sled that will be there but they haven't updated there schedule to reflect it. www.kentenpullers.com is the pulling association putting on the event. I've seen them several times and they have good sleds and always put on a good show.

I just checked and they have the truck classes listed for that pull and that the tractor classes are pending. I know they had several tractor classes for the original pull in Covington that was rained out so they should have some this time as well.

You also know what they say about people who post three consecutive times in the same thread don't you.

Hey Streetsmoker,

I was thinking on my way into work this morning, maybe in order to be able to run 16's on the back so you can get some slicks, you can retro-fit some rear brakes of a 2nd gen, the 01.5. Then you would be able to run 16" wheels back there. I dunno if it will all bolt up or not, might need to do some cutting, but you never know till you try.

Hey Happy, found these, maybe it'll help. http://www.stocktonwheel.com/4wd_offroad.htm

those are cool, but John wants to run slicks on the rear of his truck to try and get some traction on the strip. His problem is, most street slicks, and racing slick are 15" or 16". The 3rd gens are not able to run anything smaller than 17" and also can not run some 17" wheels because of clearance issues with the brake caliper setup. If he can find a way to mount 16" wheels on his truck, he can then run some slicks.

I was thinking of the Hummer and Power Wagon 24 series. The ad states they will custom build a wheel for you. Would probably be cheaper in the long run. Find a slick that fits in the wheel well and build the rim to match, if you can't buy off the shelf.

but the problem still remains that he needs at max a 16" wheel so he can get slicks, but 16" wheels will not clear the stock rear brakes. So something has to be done on the brakes first.

Hey Guys ,Bet you thought I droped off the planet, But No such luck Just still stuck in lousiana,got a new toy,look in sig.went to biker blow out last week ,going to ala. the weekend of the 5,6,7, nascar....24 Rules.....dodge running like it should but been driving the jeep to work and around town so its stays parked till needed long hauls coming up.hope you guys are good and hope to get to geter soon Perry

Congratulations on the new money pit, they can be alot of fun. You can check mine out in my sig as well. You know how it is, more projects than time. Hope your trips are safe and trouble free.

Man there's a blast from the not to distant past!!!!! Hey Smokey, you know we got a dyno day this weekend rite? Good to see some folks still around lurking.

Hey Happy, I'm looking into many different options rite now. Including some high offset 15in. rims. I think an easier fit would be the rear brakes from a Chevy with the same AAM 11.5 rear. I talked with the DHRA pres who said that a few slick tire builders are looking to tap into our market with some correct size slicks.

As of rite now, I'm going with some Nitto 404's in a 305/60R17 on 17x9 wheels. Gota be a heck of a load better for grip than what I have now

Hey Streetsmoker I found out a couple nights ago that I might be able to take you on the interstate.[laugh] Me and 3rd gen were playing and I ran it on up past the 120 mark.:o I thought it was suppose to cut out at 110, who knows.
It was shaking a little though. Might have been the tires since they are about ready to be put out to pasture.

That is more than engouh to out-run D-max ;)

Smokeys Back!!!:o [roll] [guitar]

Yea, I hear all you guys about that top end issue. That night coming back from Decatur AL tim wasnt able to pull as hard as me, but once I hit the 103mph mark, he was gone. He got far enough ahead that I lost him for a few miles!!! And I have to give the ole dodge some credit, it pulls pretty darn good to. I wouldnt try him with out a little something extra with a stock 3rd gen!!:cool:

I got my new lift pump installed & relocated with the Vulcan big-line kit.
It seems smoother on the bottom end, but still feels weak. More of a difference than I would expect just from going from 245 to 265 tire size.

I just might have to splurge for a dyno run to see if I've really lost power, or just feels like it. It put down 230 hp at my last Colorado emissions test, Sep 2002. Oh yeah, it was 186 the week before, when it was "stock". I installed the 275 injectors over the weekend and went back for a "re-test". ;) It ain't a hot-rod truck, but it ain't bad either.

HEY Guys, got the cam in today[guitar] and have the 3 vids Roper shot of me at the strip in Commerce posted in the Racing forum here.

http://www.dieseltruckresource.com/dev/showthread.php?t=116425

Streetsmoker, are you going to be all put back together for Saturday?

What you meen TRad? I'm not broke down??????????????????????........................ .uhhhhhhhhhhhhh................................... .............................hold on let me go check............................................. .................................................. .................................................. .................................................. .................................................. .................................................. .................................................. .................................................. .................................................. .................................................. .................................................. .................................................. .................................................. .................................................. .................................................. .................................................. .................................................. .................................................. ..........................Nope thank God!!!![laugh] [laugh] [laugh] You scared me for a minute there.

HEY Guys, got the cam in today[guitar] and have the 3 vids Roper shot of me at the strip in Commerce posted in the Racing forum here.

http://www.dieseltruckresource.com/dev/showthread.php?t=116425Seems like you may have been in pieces.:confused:Just wondering if Saturday was going to be a tuning session for you or a wrenching session?

Cam as in Camera I think is where the confusion is.[laugh]

I hate it when someone so young starts getting confused so easily. John is such a nice guy.[redface] [whistle] :rolleyes:

It's ok. My next go fast goody will be a set of slicks if I can ever find some. That and the Diablo Predator Tuner I'm geting tomorrow. So yeh Sat. will be a tunning session for me.

I linked a site to happy, I think in this thread, that will build you whatever you need.

Hey Happy, found these, maybe it'll help. http://www.stocktonwheel.com/4wd_offroad.htm

I was thinking of the Hummer and Power Wagon 24 series. The ad states they will custom build a wheel for you. Would probably be cheaper in the long run. Find a slick that fits in the wheel well and build the rim to match, if you can't buy off the shelf.If you haven't seen it, here it is.

Hey guys I probably should put this on the performance page, but I know yall have the brain power to tell me. [laugh] Whats the difference in getting say 50 hp nozzles and 50 hp injectors. Or do you have to get both.

Nozzels are just the tips of the injectors and injectors usually means the entire body tip and all. Either one is fine. Theres nothing to tearing an injector apart and replacing the tip or nozzle. A lot is all personal preferance to. They may be refering to the same thing, just different names. Most likely same thing.

We in the buisness refer to the tip as the tip or nozzle. The body is the body or nozzle holder[dummy]

I finished installing my fuel pressure gauge today.
The gauge is nice, but I an't happy with the pressure. :(

cycle the pump, engine not running - it builds 15 psi, but drops when the pump stops. (is that normal?)

engine idline - 14psi

driving the truck, it is like there is a connection between the throttle and the FP. It definitly ain't steady!

Empty truck, I can hit 10-11 psi on the 1-40 on-ramp. :(
Driving around, it is mostely 13-14 psi.

I only drove it home from my shop today (jumped on i-40 from Danny Thomas to Riverside exit).

This is with NEW campaign pump relocated to frame rail, new filter, Vulcan big line kit.

My truck has the rv 275 injectors & a boost module. stock turbo, no fueling box... see more truck details here (http://tinyurl.com/4gsp5).

Comments?

Sounds about right to me Prospector. Your fuel pressure will flucuate with engine driven fuel demand.

Hey TRad I've allways know about Stockton. And have allways been an option for me. Just knew they would prob be expensive. I'll have to call them up and see about some custom rims in 16" made with a special backside curvature to clear the brakes. Prob be my best bet, and I'm tired of looking around and asking questions people don't seem to know the answer to.

Like I told Dmax earlier. It seems I'm the only one around attempting this on a 2wd 3rd Gen.

Dmax, PDR has both at the the same hp rating. the tips were cheaper and if I go with something and get the same power why not go with the cheaper ones? The next question will be if I do get some how big. 50 hp 100hp or what.

The tips are cheaper becouse you have to take your injectors out and replace the tips and put your injector bodies with the new tips back in. If get the new injectors they already have the new tips and you just pull and replace and then you have a complete set of extra injectors. But I'm not sure what good used stock injectors would do.
Oh, and go big or go home. [guitar] http://towrig.com/forums/images/smilies/burnout.gif Wouldn't be much fun to pay for and replace with the 50's and then wonder what the 100's would be like. [duhhh]

Go for the 100s. It really wakes our HO trucks up. That's what I got. It made the same difference if not more than when I had just and EZ on her. I know a really good place to get them from that is cheaper than anywhere else.

I know a really good place to get them from that is cheaper than anywhere else.

Don't be holding out on us, he ain't the only one who wants them. Not that I have the money. :(

Well fellas, my search continues. Called Stockton and they're a no go. If they can't build a custom set of rims I don't know what i can do[verymad] [verymad] [verymad]. Called BFG and Toyo no go there either. Looks like my only option is to try the M&H Race Master 29.5x12R17's and hope they don't mess with the overall gearing to bad.

Not sure if we get in trouble for posting links like this but here goes

http://www.truckaddons.com/Catalog/subpages/edge_dodge_jammer-injector-nozzles.html

They're about 188 for the 100 horseys. They've got great prices on edge stuff.

Cool man, thats right up my ally on price range. I said my tranny would be next but I guess I will use her till she goes limp. If I get them we will have to have a wrench day and make sure Dmax is there. Could possibly even find some newcastles for him.

[QUOTE=They're about 188 for the 100 horseys. They've got great prices on edge stuff.[/QUOTE]

I looked and do they come as a set cause it ask for a quantity on the right side. Maybe im wetarted and didnt see something.

lol...Yeah it's a set. If you put in 6 you might as well go buy some Mach's. $$$

[dummy] Yeah when I put in 6 I said a bad word then said maybe another day.

Go with the 100,s. To install the tips is no big deal, I would have to fab up a vise to hold the tip pressed it but it should be easy. If I could do it here I would have it made, I have a vise at work!!!!

Oh, did I hear New Castle?????

Dmax is it something that I could do here at the house with my vise. Cause for that price Iam really thinking about it.

I used a small prybar and a rubber mallet...Sounds crude, well it was but it worked. I guess the carbon build up made it crazy tight.

Before I do it Ill have to run some seafoam through it and maybe help get rid of some coking.

Oh yea. When you get the injector out, you will see a place at the bottom where a wrench will fit. This is the nozzle retaining collar. The secret is, you have to put some pressure on the very top of the fuel injector body and the tip of the tip. If you dont, you run the risk of breaking the little alignment stub on the washer under the tip off and then the complete injector is crap. You also have to keep the whole assembly from turning while you break the collar loose. Once its loose, you can take it out of the vice and screw it off by hand, push the old tip out and then slide the new one in and reassemble the same as dissassemble. I will try and get some step by step photos together at work next tuesday and post them up.

dmax call me asap 609-2788, i was at your house at 6:50, nobody home, karl

Man Dmax sound like I need a couple sets of hands. Wonder if I can get the wife to get dirty and help me. [laugh]

I wonder if you could work up a c-clamp to put the pressure on it? The injector that is.... Oh yeah, HI!!! I'm back! Been out working my jibblees off, putting my truck back together with some enhancments, headache rack and lights...I wike the purty lights....In the morning it's haul 8N ford to the house for repair, get more wire and a few odds and ends and finish the wiring on the truck, then DONE!! For now.....until I find more purty lights!!

Streetsmoker you put anymore power to that truck and your gonna need wings!!! You know what you want to do....Just tub the rearend and be done with it, some big ol' Mickeys on the back. [laugh]

Everybody is throwing the power to there rigs here lately. Roper with the chip, Prospectors 275's, big lines.....I guess at our next meet(when I'm there) I'll have to hang around the back so as not to embarass everyone with my stock, slow truck!! [laugh] [laugh]

I put those 275's on there back in 2002.
Sorry if my post was kind of ambiguous.

HAHAHAHAHAHAHAHAHA[roll] :cool: [guitar] [coffee] :o [laugh] :D :eek: :) ;)

I WAS ONLY 21hp BEHIND STREETSMOKER ON THE DYNO TODAY!!!!!!

Thats right. I yelled it. I needed my cummins to pull my big head home tonight.

I used his Diablo programer and my DB box and got 490HP and a little over 1000ft/lb torque!!!!! Needless to say, I will be getting a diablo programer soon, very soon!! Thanks Streetsmoker for letting me use the programer. I think that is worthy of updating my signature????? I never would have believed that two power adders and a strait pipe would net me those numbers but it did!!!

wow!! somebodys head swelled right up!!!!!!!!!!!!!!!!!!

yup!!!!:cool:

Congrats Dmax, now we just need to get you to the track and watch that dually hook up.[laugh]

I'm gonna have to add a jet engine to my barbeque grill just to keep up with you guys next time!! [laugh] [laugh]

Heres where the idea for "Redneck Nitrous" came from. Dont ask, just wait for our video of it to hit the net!!


http://video.thedieselgarage.com/category/Nitrous/3/13c2edf7-6f23-4e42-a81e-59e9ff63f8c3.htm

hehehehehe.....that's funny stuff there!!! Sometimes when we have a car with a bad fuel pump we'll sit on the front of the car with the hood up and have another guy get in and start cranking it, meanwhile the hood jockey sprays brake clean in the throttle body and does that while the other guy drives the car into the shop!! It's quicker than using our worn out pusher especially on warranty jobs!!!

Got my cab rack done.....well, almost. Put some diamond plate end caps on tonight, not in picture, got all the wires done outside. Now have to wire up the switches in the cab for the work lights....I have an unbelievable amount of time in this thing.....http://www.freesmileys.org/emo/sleep022.gif (http://www.freesmileys.org) and boy are those lights bright at night....wait until my outer lights get turned into LED's :o

http://www.dieseltruckresource.com/pics/data/500/medium/cabrackdone001.jpg
http://www.dieseltruckresource.com/pics/data/500/medium/rack_at_night.jpg

I just got back to my house about 5 mins ago from KY. I think I've been driving all weekend.

I had a blast! It was well worth the drive down there. My hats off to Southern Speed. They have a great little place down there.

I think we should put my bumper on John's truck and strap Patrick to it with the bottle and send him down the track. I'll film.

I was seriously impressed with everyone's numbers. Especially Streetsmokers. That's a pretty hot little truck. I'll have to get a ride in it next time.

Well my trucks in bed and I'm about 5mins from it also. I'll check back in tomrrow.

I'll do it. Bungee cord me to the ranch hand and give me a bottle and we will see what it can do. Oh wait, after saturdays night of drag racing I have learned that streetsmokers truck will NOT hook on the street at all. More power will only mean more slipping of the rears so it may not be worth it??

I guess we will have to try and see[roll]

yes the numbers are correct for dmax, im still trying download the vid with my new soft,and hardware, what a pain in the arse!!!!!!F computers!!![duhhh] [duhhh]

I feel yur pain Carl!!! Sometimes i want to throw this thing up aginst the wall. But then I think how much it cost me and come to my senses again.

I agree.....sometimes it makes me fightin mad, mumble some words to the screen, like it really understands me [laugh] Then just walk away for a few minutes.....[coffee]

Hey Dmax...

I mean NEWCASTLE maybe that'll get him to come around.

Are you still goin to that pull this sat. at the sugar farm. We're plannin on goin. How much does it cost to get in and since it's all day do we need to bring food.

New Castle??? Where?


The tractor pull is all day and I would bring food if I were you. They have cnssesion stands but the pickins is slim. I will be there at about 7:00 PM, thats when the trucks start to get going. I doubt I will make any pulls though, After last week ends 491HP stacked dyno run, im giving the truck a rest!:cool: But I will be there unless somthing bad happens.

New Castle??? Where?



HERE! (http://www.dieseltruckresource.com/dev/showthread.php?p=1134851#post1134851)

.

.

.

.

Not really. That is just where I posted the video and photo of StreetSmoker's awesome dyno pull. :D

Landers Dodge Just Told Me My Truck Is Not Under Warrenty Cause My Bully Dog, Im Not Sure If They Saw My Sticker Or Actually Can Tell On Their Computer, They Said It Need A New Relief Valve"check Valve", And The "injector Springs Are Messed Up"

Man that SUX!
[tapdshut]

Hey Streetsmoker hows the tranny coming along. I havent seen you put anything about it.

Just recieved word from Polesmoker, I mean Streetsmoker that the new trans is awsome. Actually he said awsome was an understatment. Only time will tell.

Deezils truck is still not fixed. When he gets some time he said he is gonna take it to the deal he bought it from. I hope they will take care of it for him and Im sure they will.

Good luck both of yous guys!!

StreetSmoker - TRANNY?
I thought he was looking for TIRES!

Now what did he do with his tranny?

He got him one of them there fancy ones from gorearand(however you spell it) more than I have paid for a couple of vehicles.[laugh]

I understand about the EXPENSIVE part.
Don't ask what it cost for my ATS tranny & TC, installed. :(

Other than the price, I like it though.

[coffee]

I've only had this thing in about 6hrs. One great thing is that my turbo lag that was present after the Phat Shaft turbo is now gone!!! Best way to launch now with street tires is to just floor the throttle from a dead stop and no power braking.

Dang that was a quick Tranny swap!
Did you doit yourself (with help), or did a shop do it?

Drove up here to Iowa strait to Dave's shop. Had the tranny allready built and waiting for me. Would have been swapped, road tested and on my way by 2pm today, but had to pull the flexplate that was to go in mine out of the truck one of the mechanics installed it in. Then after all was bolted in. Forgot to put in the extended pickup for the DD tranny pan.

uhhh.. You got your signature wrong! [nonono]
Dyno'd 519hp/1117tq #2 only 6/16/06

That was 9/16/06

When are you going to add nitrous?

[coffee]

I think everyone is missing the boat on this one...

So streetsmoker, tell us, what bank did you rob recently? Diablo...Goerend Trans...looking for slicks....Someone found a golden egg laying goose.

I would tell you Happy, but then I would have to................................................ .................................................. .................................................. .................................................. .................................................. .................................................. .................................................. ......Well, you know the rest!!!



[laugh] [laugh] [laugh] [laugh] [laugh] [laugh] [laugh] [laugh] [laugh] [laugh]

I still want to know when he is gonna get the jetfighter conversion kit? Gonna here Streetsmoker go by on the interstate, you'll know by the sonic boom!! [laugh]

I think everyone is missing the boat on this one...

So streetsmoker, tell us, what bank did you rob recently? Diablo...Goerend Trans...looking for slicks....Someone found a golden egg laying goose.


The clue is in the *other* expense coming up, not truck related:
He's gonna take a vacation to the Philippines to visit his GF.

Y'all get the picture yet?

HE AIN'T MARRIED!
He can do what he wants to with his $$. And his truck.

[coffee]

Hey!
Anybody have a car trailer in the Memphis/ N. Mississipi area that I can borrow for a couple of days?

My S-10 blazer that was stolen about 6 weeks ago was found in Pearl River, LA about 2am this morning. The tow-company that has it is a Mon-Fri operation; so I would need to hook up this afternoon and leave as soon as I get off work tomorrow.

Apparantly, some Katrina "victim" needed my Blazer to get back home to the "Chocolate City" :[verymad]

I've got a 16' flat that would haul it pretty good Prospector, but I think I am a bit out of the way for you...:o

Hey, wanted to tell you guys. I found a dyno in Lebanon, Tn. MD1750 Mustang dyno at a place. I have emailed them for information and when I find out I am going to set up a dyno day in the spring-ish time, maybe February. I would like to extend an invitation to MSDTR #31!! Check out our thread, I was a bit more detailed there.

I went ahead an reserved a trailer one-way from Slidell, LA

ROAD TRIP!

ROAD TRIP!

Have a safe one. But the truck might be mad you didn't put some weight behind it. I could consider that small load insulting. [laugh]

I have to agree with Billygoat on this one. Just throw it in the bed and come on home with it!!

I take it that one I saw totaled on the interstate wasnt your prospector??:cool:

Man prospector I wish I would have read this thing earlier. I dont know if I could have done it any cheaper for you, but I would have gotten it for you for the price of fuel and maybe mikky ds.

i have a 18ft car hauler sitting at peterbilt of memphis if you need it, 2'' ball and a 7 way plug, got ramps under the beaver tail

Dang... so many offers.
Heck I even met StreetSmoker going down the road a few minutes ago, and he offered his trailer too. He was headed for the Motorsport Park and saw me going the other way, so he did a Uey and caught up with me.

I had to make a decision quick, and didn't know if anybody would even read the forums in time; so I already reserved a trailer one-way from Uhaul in Slidell. It would probably cost $50 to cancel now. :(

Anyhow, thanks for the offers! I know where to go next time I need a trailer. [duhhh]

Deesilpwr, that sounds a lot like the description of the one that was stole out of my drive way last year! LOL I wish I still had it.

[coffee]

no i was kiddin, i dont have a 18ft car hauler with ramps under the beavertail and a dent in the right fender! i dont know what i was thinkin, sorry!!!!!!!! you must have the wrong guy! p.s, start lockin your **** up!!

hey whats the **** for???????, you can say **** on national t.v!!!!!!! ****!!!!!!!!!!!! hey this is fun

How did you know about the dent in the right fender? LOL

Streetsmokers new Trans is doing him proud at the track tonight.


Official new track ET,

12.66seconds still on street tires
Good job streetsmoker, you make us proud

Rattle[roll] Rattle[roll] Rattle[roll] Rattle[roll] Rattle[roll]

[coffee] [coffee] [coffee] [coffee] [coffee] [coffee]

Did he get another run at at that 13 1/2 second Camaro Saturday night after I left? Fill me in!

Look out Camaro!

Any updates from StreetSmoker?
Did he improve on the ET?
What MPH?

Inquiring minds want to know!
[coffee]

Best 4 runs tonight all in consecutive order:

12.84@109mph (Diablo Stack)
12.67@109mph (Diablo Stack)
12.66@109mph (BDPP Stack)
12.72@109mph (BDPP Stack)


There were a couple runs made between the 12.66 and 12.72 passes, but blew the launch out of the hole. Track started fading away quick as it was getting late and cars weren't running as much.

Looks like a pretty even match between Diablo and BDPP.

That's one fast truck you got there. Let me know next time you are goin to be at the track and I'll come watch. [guitar]

Yeh, it looses some power on the upper end, the BDPP does. I still think I can get a 12.5out of it cause the 60 ft. times are unchanged. Rite at the 2.05-2.10sec range. I have pulled a 2sec flat 60ft. before with these tires. I was launching somewhat conservative also at 1600rpm's. So a little higher to say 1800 or so should help.

Hey Bily, I need your # if you want me to call you before I go out there again. This will prob be the last time though before they close for the season.

Smoker, my number is 901-378-3572. It is about time for them to close for the season. Valerie's been wantin to go but we haven't made it out. I'd love to see a diesel smoke some gassers. You get much faster and they are gonna make you put a roll bar in there.

Have a good weekend everyone, I'm headed to the house. [guitar]

you keep this up and you will have to install a roll cage! good job! dmax did you call sam???

Roll cage not required till 10.99 or 11.49sec., so I'll be safe for a long time.

Sam decided to bail out early today or so I was told. I will catch him monday.

Roll cage not required till 10.99 or 11.49sec., so I'll be safe for a long time.

Long time, huh?
Tires & nitrous and you're there!

[coffee]

Like I told you in the hanger that day, I take donations and gifts without any guilt!!!! With tires and the funny gas, maybe 11's. I need to get rid of the top speed limiter also. I would really like to be the 1st 3rd gen in the 11's without a CP3 mod or cam. We'll see come spring. Don't have enough time to find out before the season's finished for the year.

We were getting down on the list a little bit i thought i would just bring us back up.[tapdshut]

Thnx Roper I was bout to do the same.

I am looking at one of them there delemas (sp) Me and my wife found a house in the historic distric around here that is a diamond in the ruff for about the right price. Fixing it up though would severely hinder my rebuild of my 64 chevy and bombing my Dod... I mean cummins. It is a 4 bed 2 bath 3200 sq ft house with 16 foot cielings through out. Hard wood floors, beautiful layout and a wrap around porch that is about 10 ft wide around three sides. My dream house, but it would be like a ten year project if you know what I mean.

That does sound like a nice house. Put it on a few acres and it would suit me just fine. That is a tough decision. Guess you just have to decide which one you want more. Although you already have the car and you can fix it up later but you may not be able to get the house later. But it ain't much fun to have projects sitting in the garage that you haven't worked on in forever. I know all about that.

Hey Billygoat our kicking game this weekend left something to be desired. I dont think I would have minded as much if all four of them werent in the same spot.

Yeah, I feel sorry for the Tiffin, just being a true freshman. At least he'll have plenty of oppertunities to make up for it. It was certainly something in his head. I hope his dad can get him straigned out this week. We are liable to need him again. Of course I'm not blaming him, it's not just his fault. Actually while I was typing this I was browsing my usual Bama sites and espn reports that Christensen is healthy and will be kicking, but they also said that last week until about Fri. and he started having problems again.

One thing I wonder about is why we abandon the pass in the red zone, it works so well the rest of the game why not throw there too. And on that note for the love of Cummins powered trucks let JJ tote the rock. It looks like we are 13-14 point dogs in this one. I think we'll see a team firing on all cylinders like last year. We'll break there hearts in the swamp again.

yeah, I hope yall beat Florida, make it a lil easier on us dawgs....

well boys, im lookin for the best injector my money can buy!! dc pretty much denied my warranty cause of a sticker and my milage in the ecm only reads 47 miles when odometer is 26,000. f-em!! it will cost me more to fight this issue than to go after market, really how many ctd throw rods or blow head gaskets!! fuel and injection are defiantly the weak link.

Who did you take it to this time? Did they look and see it or what? Did they show it to you? Give us more details. How do you know its an injector issue and not the relief valve? Details man details, we need details!!!!!

10 year project.....boy do I know what you mean Roper. I keep telling my wife we need to swap the boy's room with the two girls that way they can have the bigger room, then get bunk beds and paint the rooms and dress them up....well, been saying that for 5 years!! Almost did it on vacation a couple weeks ago.....but I somehow got lost in my shop working on my headache rack!! Then there is the "lets finish the basement project, the build another shed for lawn and garden junk with one half a barn for my goats when they are in the other field, getting my mustang running again, Bolens running, restoring the model 71 cub, 122 cub.........maybe I can get them all done before they have to plant my crusty ol' body in the dirt. [laugh] [laugh]

Dodgeguy I guess if we ever finished all our projects life would get boring wouldnt it. Just laying around relaxing, sipping a cold bev.... I mean Newcastle. No thats not the life for me. I need stress and stuff to take all my money.[duhhh]

I need stress and stuff to take all my money.[duhhh]

Thats what women are for[duhhh]

Life is all about sitting around, working on the Cummins, playing paintball on the weekends and drinking NEW CASTLE!![roll]

Yeah Dmax and add 3 kids, bills, house payment and a job that only pays if your hands are physically touching a car...then you have stress! [laugh] [laugh] Maybe not the stress, just being busy. I like to have something I can do....I'd hate to know what it was like to walk down in the shop and stand there looking around thinking, "what can I do?". It's more like...."well, which one should I work on today?".

Oh, the job part......well, after monday maybe a distant memory, a blip in the past...did I used to work on cars???:confused: :confused: Keep your fingers crossed!

Yeah I would like to do something else. I really liked being a lineman but when you get on this base you never leave. they dont pay great but when you add it all up along with the security of never having to worry about not having a job you get stuck.

All the guys at work all they know is cars, fixin cars and a couple good friends have said they wish they could do something else, but don't figure they could. I'm lucky cause most of my career has been heavy equipment/diesel and this last 3.5 years on cars. It is a point brought up at interviews, "oh, your working on cars?". It's hard to make them see that it's just a blip out of 17 years of turning wrenches. This one looks good though. We interviewed over lunch, suprised him about my welding experience, and really surprised him about my class A license and current health card. So I have A LOT of background which I am hoping will get my foot in the door.

Our teachers always said, "learn everything you can and get everything you can from the employer, if you quit you have all of that other stuff under your belt". So basically that's what I have done and now here I am.

Carl please fill us in on that truck of yours!!! This seems like something to get armed with Moss Magnusun Act and fight over.

i took it to gosset were i bought it, they installed a new valve, no fixey. they can block off any injector and it starts fine, gosset was very good to me and spent alot of time in research, reman cummins injectors are 540$, A PIECE!!

About The Moss Act, Is Really Worth It?? The Fight I Mean. Trying To Talk With D/c Is Like Talking To A Brick Wall, And I Can Tell They Would Spend Time And Money To Weasel Out Of Their Warranty Claims, They Dont Care About Repeat Customers, Pretty Soon They Wont Have Any

So what's the dmage $$$ wise? Also, whats is the exact problem? It's a tough call, but you do have a lot of evidence showing bad injectors on the '04.5+ trucks and even there own tsb's that state fuel filters are not good enough that originally came with the truck. As they now state a lower micron filter should be used. This is a prob that sems to be creeping up around and they know it but can't afford the pay-offs for the warranties.

Hey Guys ! Just checking in to say hello ! Wish I coulda been at the dyno day instead of The Med ! I've been home now almost two weeks Monday and am doing great ! I've kinda not been too excited about the diesel forum knowing I couldn't get out and piddle on the ole truck. I am already graduating off the walker and onto a cane so maybe in a few weeks I'll be off the cane. Hope all ya'll are doing well and take care.
Abby

well money wise is the cost of injectors, 500.00 bucks a hole from dodge. might look in rebuilding them. yes it really does look like injectors, the injector will bleed back in the return system, old ones would blow white smoke or dillute the oil with fuel. not so for the latest and greatest

$500 for each injector!! Wow!! Those are the unit injectors right? Solenoid on top or something like that? Best of luck to you! If there is a bulletin about shoddy parts from the factory they should fix it regardless. That's why I worry about taking my truck to the ripoff store, afraid their gonna give me poo poo about gauges, pipe, bhaf. So I'll have to explain that I still have not found that money box in the backyard so these were the cheapest mods I could do!

Abbys back. Glad to hear your coming along there Abby. You need to hurry up and get back 100% so we can tackle that dowel pin!! Im not gonna let you forget about that. I have new castle, tools, and time. Theres mothing stopping us now. And my labor is FREE for you!!!!!![roll]

Hmmm I thought I replied but it did not come up !?
Thanks DMaxEter ! Those NEwcastles make great painkillers when used in the right dose ! Maybe soon I'll be able to come up and visit you whilst the weather is still nice and we can assassinate that dowel pin problem.
Abby!

Rise and shine men!!!!! Time to wake this sleeping beast of a thread up. Get off your lazy asss's and start posting again.[laugh] [laugh] [laugh]

okay dad I'm up, you got breakfast ready yet???

I don't feel like going to work this morning, I stayed up to late with the girlfriend.... [guitar]

okay dad I'm up, you got breakfast ready yet???

I don't feel like going to work this morning, I stayed up to late with the girlfriend.... [guitar]
So let me see if I've got this right; Happy is Street's son. Hmmmm it's probably a little early to try and figure this one out.[coffee]

haha, thinking way to hard there this morning there TRad... haha, if i was his son, he would have been busy at about age 10. hahahaa

I know, way too early. I just can't figure how D-max fits in there.

I've been lurking around in the shadows here. I guess I'll drop in for a sec.

Quick question. Getting new tires next week, looking at 315s. I've got 265s right now. With 3.55s and my 6spd I should be okay right? I know some people love it on the hwy. I don't tow very often or really heavy when I do, just a 18' with a jeep on it. I don't want to buck up for them and then be dissapointed.

I'll step back into the shadows now.........

Happy your post on the other forum sound scary. My wife does not go that far. And she has already got me. [duhhh]

I cant help you Mglass Im 2WD. Sorry

I am a cousin-in-law!!:o [laugh]

Those tires will be fine for you Mglass. I promise, your truck makes enough power to more than overcome any added drag.

Well, It's official men. On the 23rd, the truck goes in to Wade's shop for a little laughing gas upgrade. I'll be picking it back up when I return home from the Philipines. Then we'll see how long the stock head gasket will last. I will turn the boost down a bit though, from 50-52psi. to 45psi. or so.

I'm here, nothing intelligent to say so......blah, blah,..blah blah blah!! [laugh] Oh, wait, I'm going to Knoxville on Friday.....job interview!! WAAAAA HOOOOOO!!!! Please let me give flatrate the universal hand signal for GOODBYE!!

street smoker, where should i send my injectors??

I will turn the boost down a bit though, from 50-52psi. to 45psi. or so.I thought I read something the other day where you said you were only getting about 40 - 42 psi. Hmmmm.... maybe I need new glasses?[whistle]

Send them to Dynomite Diesel Performance.

http://www.dynomitediesel.com/

Boy Streetsmoker you better get it all while you can.[guitar] You are going to come back and have to use that thing to carry around that ball and chain.[laugh] [laugh] [laugh]

Boy Streetsmoker you better get it all while you can.[guitar] You are going to come back and have to use that thing to carry around that ball and chain.[laugh] [laugh] [laugh]:eek: Boy, that sounds serious! If he gets all matrimonial on us we might have to change his name to (ball and) "Chainsmoker". [laugh][laugh][laugh][laugh][laugh]

Ha, that was a good one Trad. [laugh]

I knew it was dynomite Deezil. They do some impressive work there!

first time i asked, he told me don m. so haaa

Either one, both are good. Don uses EDM type, and DDP uses extrude hone. Only difference relly between the 2.

Hey boys I'm flyn high tonight. I got my exaust put on my 64 today and it sounds good. 2.5 from the header back 40 series flowmasters and turned down right before the rear end. The best thing is I just about stole it for 275.

So is there gonna be a November meet? Just asking about November, cause I am booked every weekend in October....

More news....My SMARTY will be here today...

Enjoy it while you can. Ref. http://www.dieseltruckresource.com/dev/showthread.php?t=118721

HA HA[laugh]

More news....My SMARTY will be here today...
[guitar] http://towrig.com/forums/images/smilies/burnout.gif

And if you get tired of the girl that is rearranging your house you can always go after this girl. She likes to sit around and eat bacon pizza. [laugh]

http://sportsillustrated.cnn.com/multimedia/photo_gallery/0610/campus.cheer.conley/content.1.html

I sent Valerie that link to your thread about your girl over in chit chat and she said, "huh, that seems kinda familier." and I said, "yeah, ya think." [duhhh]

umm, yeah, I think she would make a great rebound, one question, does she come with the dog??? If so, I will dump the one I am with now. haha