joelegs1000

I figure this is the place to ask, Is it possible to have you stock injectors modified to create an additional 100hp. I dont know much about it but heard for $300 for 100 hp, sounds good to me. Also is it a good idea or bad. thanks

Luken

Formula 1 Flux injectors is what you need.

joelegs1000

Would that require any other upgrades and what does that run$/hp increase. I dont have to much done to my truck but Im starting to finally do stuff to it.

joelegs1000

Just did a search on those and nothing would like to know more.

masonic-dodge

Just because they are called 100hp injectors, doesn't mean that your going to get 100hp! You also need FUEL to supply them.

With that said, "GO FLUX" or don't go at all, just my 2cents

CRIS

wcjp

I'm running DDP injectors. Not sure about the current cost. I ended up with 83hp.

Jetpilot

Look here: http://www.performancedieselwarehouse.com/793379.html

Doug Smith

deezulsmoke

Check this site out if you are not wanting to empty your pockets for 100 hp.
http://gethoned.com/diesel.php

The only difference is the extrude honed may smoke a little more than the EDM machined injectors. For around three hundred bucks you can send your injectors into that website and have them honed out. Hope this helps. Unless you are really modding the engine I would not spend the money on the f1s.

CATCRACKER2

"gethoned" the link doesnt work i would like to check these guys out