Modded p7100s
#4
Registered User
Join Date: Jan 2005
Location: Calgary
Posts: 13
Likes: 0
Received 0 Likes
on
0 Posts
It wont cost anywhere near that if you go call Interior Diesel Performance ask for Rob 1 250 833 9904 he did mine and it is amazing the amount of fuel he can get out of a pump and have it burn clean
Thanks Ted
Thanks Ted
#5
If J.R. Adkins a call if you need some pump work. 3K sounds a bit high, unless your putting everything into it, 13mm plungers and barrels, quick rate cam and etc. You can get alot of fuel from a 215 pump. I bought my 215 pump for $700 with throttle linkage and everything else on it. J.R.'s number is 317-281-3130
#6
Registered User
Join Date: Feb 2003
Location: Laredo, Tx, 7 hours south of Dallas
Posts: 1,123
Likes: 0
Received 0 Likes
on
0 Posts
The P-7100 pumps are great pumps.
Depends on what you want to do, the sky is the limit. It's easy to go over $4k on a P-pump setup. But, it's also not hard to keep the bill under $1,000.
If you want stupid power, then you need a stupid pump, and that comes with all the extra driveability side effects.
I had one of JR's 1450 pumps, and it was just crazy, with my '55 and Big Air, I could hit 100PSI boost no problem, and rev over 5,000.
Drop a PM to J.R. or I and we could hook you up tight.
Merrick
Depends on what you want to do, the sky is the limit. It's easy to go over $4k on a P-pump setup. But, it's also not hard to keep the bill under $1,000.
If you want stupid power, then you need a stupid pump, and that comes with all the extra driveability side effects.
I had one of JR's 1450 pumps, and it was just crazy, with my '55 and Big Air, I could hit 100PSI boost no problem, and rev over 5,000.
Drop a PM to J.R. or I and we could hook you up tight.
Merrick
Trending Topics
#8
Registered User
Join Date: Feb 2002
Location: Sharpsburg KY
Posts: 1,839
Likes: 0
Received 0 Likes
on
0 Posts
Originally posted by halerazor
sheid, piers and columbus diesel supply are the best when it comes to these pumps
sheid, piers and columbus diesel supply are the best when it comes to these pumps
DM01
#9
Registered User
Join Date: Mar 2004
Location: springfield,oh
Posts: 801
Likes: 0
Received 0 Likes
on
0 Posts
i don't know of any other shop that makes billet pumps for pulling besides CDS check this link pretty sweet
http://www.columbusdieselsupply.com/tpindex.htm
http://www.columbusdieselsupply.com/tpindex.htm
#10
Registered User
Thread Starter
Join Date: Sep 2003
Location: Gilbert, Az
Posts: 809
Likes: 0
Received 0 Likes
on
0 Posts
Thanks for the info guys, I am not going stupid power. I just want to be able to push my combo to the limit (when I get twins) I know my 160 pump will not satisfy my need for speed either
#11
Registered User
Join Date: Feb 2003
Location: Laredo, Tx, 7 hours south of Dallas
Posts: 1,123
Likes: 0
Received 0 Likes
on
0 Posts
IMHO, I would remove your pump, get it rebuilt, and balanced, stay with the stock P&B's, chenge the GS's to something around 4k, put 191 DV's (the lsr cut ones are a bit smokey), and have the pump turned up to about 80%, or so. This will still cost over a grand, but the power increase has no comparison.
Merrick
P.S. Don't forget about getting some larger injectors, EDM'd
Merrick
P.S. Don't forget about getting some larger injectors, EDM'd
Thread
Thread Starter
Forum
Replies
Last Post
kruegerlouie
3rd Gen High Performance and Accessories (5.9L Only)
3
09-07-2007 07:09 AM
Crimedog
Performance and Accessories 2nd gen only
2
08-21-2005 11:10 PM
mr T
12 Valve Engine and Drivetrain
3
11-22-2004 07:58 AM